Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Material | Rubber/Metal |
Placement on Vehicle | Right Rear |
Weight | 1.56 kg |
Type | Mounting, engine |
for OE number | 1H0 199 262 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 1.0 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 7599694 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.786 kg |
Placement on Vehicle | Rear |
for OE number | 11360-AX600 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 170526 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.95 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.95 kg |
Placement on Vehicle | Front Axle |
Length | 155.3 mm |
Width | 68.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.690 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1994 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 175136 |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Cone Size | 19.5 mm |
Weight | 1.25 kg |
Steering arm type | for control arm |
Mounting points diameter | 12 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Weight | 0.196 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Track rollers material | Plastic |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 75 mm |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 164 mm |
Height | 151 mm |
Weight | 0.352 kg |
Function | Fuel filter |
Filter type | In-Line Filter |
Pipe Diameter | 10 mm. 8 mm |
Width | 134 mm |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.77 kg |
Placement on Vehicle | Front Axle |
Length | 360 mm |
Outer diameter | 133 mm |
Function | Suspension Spring |
Wire Diameter | 11.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Function | Brake Shoe Pin Set |
Weight | 1.3 kg |
Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Brake Shoe Bolt (03963)
- 2x Febi Bush, brake shoe pin (05342)
- 4x Febi Seal Ring (05334)
- 4x Febi Cover Ring, brake-shoe pin bore (06458)
- 1x Febi Retaining Plate, brake shoe pins (06955)
- 1x Febi Retaining Plate, brake shoe pins (06456)
- 1x Febi Screw (06262)
- 1x Febi Retaining Plate, brake shoe pins (06457)
Important compatibility info
Placement on Vehicle | both sides |
Length | 690 mm |
Housing Diameter | 19 mm |
Eject Force | 630 N |
Stroke | 174 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 372 mm |
Mounting points diameter | 16.5 mm |
Weight | 0.480 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.15 kg |
Width | 23 mm |
Number of Teeth | 148 |
Belts | with rounded tooth profile |
Type | Timing Belt |
Function | Timing Belt |
Replaces | 11123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner Brake Drum Diameter | 180 mm |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Width | 30 mm |
Outer diameter | 211.5 mm |
Thickness | 74.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Function | Brake Drum |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 172407 |
Number of Connectors / Ports | 2 |
Weight | 0.065 kg |
Cable Length | 1255 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Placement on Vehicle | Rear Axle |
Length | 389 mm |
Outer diameter | 111 mm |
Number of Coils | 7.7 |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter |
Function | Filter, venting (fuel tank) |
Weight | 0.045 kg |
Length | 156 mm |
Outer diameter | 47.5 mm |
Pipe Diameter | 6 mm |
Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.896 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with screw, with nut |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Inner Tie Rod (31496)
- 1x Febi Nut (39908)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023