Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 164 mm |
| Height | 151 mm |
| Weight | 0.352 kg |
| Function | Fuel filter |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm. 8 mm |
| Width | 134 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.57
Important compatibility info
| Material | Metal |
| Outer diameter | 57 mm |
| Inner diameter | 8.2 mm |
| Weight | 0.293 kg |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Brake Shoe Pin Set |
| Weight | 1.3 kg |
| Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Brake Shoe Bolt (03963)
- 2x Febi Bush, brake shoe pin (05342)
- 4x Febi Seal Ring (05334)
- 4x Febi Cover Ring, brake-shoe pin bore (06458)
- 1x Febi Retaining Plate, brake shoe pins (06955)
- 1x Febi Retaining Plate, brake shoe pins (06456)
- 1x Febi Screw (06262)
- 1x Febi Retaining Plate, brake shoe pins (06457)
£27.56
Important compatibility info
| Weight | 0.550 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 71738468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.09 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 826 mm |
| Colour | Blue |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Wire Diameter | 11.5 mm |
| Number of Coils | 5.2 |
| Weight | 1.8 kg |
| Outer diameter | 143 mm |
| Length | 334 mm |
| Placement on Vehicle | Front Axle |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 1.9 kg |
| Placement on Vehicle | Rear Axle |
| Length | 389 mm |
| Outer diameter | 111 mm |
| Number of Coils | 7.7 |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 71 °C |
| Weight | 0.177 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 8149182 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (18959)
- 1x Febi Seal, thermostat (11834)
£27.56
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 160 mm |
| Thickness | 19.5 mm |
| Inner diameter | 120 mm |
| Function | Shaft Seal, wheel hub |
| Type | Shaft Seal, wheel hub |
| Weight | 0.372 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Wire Diameter | 12.5 mm |
| Weight | 1.94 kg |
| Placement on Vehicle | Front Axle |
| Length | 328 mm |
| Outer diameter | 169 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Filter type | In-Line Filter |
| Function | Filter, venting (fuel tank) |
| Weight | 0.045 kg |
| Length | 156 mm |
| Outer diameter | 47.5 mm |
| Pipe Diameter | 6 mm |
| Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.071 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.839 kg |
| Additional Information 2 | with seal ring |
| Material | Cast Aluminium |
| Number of Teeth | 23 |
| Number of Wings | 8 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.47 kg |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.15 kg |
| Width | 23 mm |
| Number of Teeth | 148 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
| Replaces | 11123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.265 kg |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 4400 mm |
| Number of Connectors / Ports | 2 |
| Resistance | 1200 Ohm |
| Cable Length | 4280 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 690 mm |
| Housing Diameter | 19 mm |
| Eject Force | 630 N |
| Stroke | 174 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 372 mm |
| Mounting points diameter | 16.5 mm |
| Weight | 0.480 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Weight | 0.896 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with screw, with nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (21840)
- 1x Febi Inner Tie Rod (31496)
- 1x Febi Nut (39908)
£27.56
Important compatibility info
| Weight | 0.592 kg |
| Placement on Vehicle | Front Axle |
| Length | 155 mm |
| Width | 79 mm |
| Material | Thermoplast, PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (37566)
- 2x Febi Rubber Buffer, suspension (170481)
£27.56
Important compatibility info
| Weight | 1.77 kg |
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Outer diameter | 133 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023