Important compatibility info
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Weight | 0.428 kg |
Additional Information 2 | with ball bearing |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Replaces | 177065 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.72 kg |
Length | 131.5 mm |
Outer diameter | 25 mm |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (01056)
- 1x Febi Bush, steering knuckle (01057)
- 1x Febi Bush, kingpin (01058)
- 2x Febi Lock Ring, steering knuckle (01059)
- 2x Febi Seal Ring, steering knuckle (01060)
- 2x Febi Seal Ring, steering knuckle (01061)
- 2x Febi Circlip (01062)
- 2x Febi Grease Nipple (06635)
- 1x Febi Bush, kingpin (06504)
Important compatibility info
Weight | 0.31 kg |
Placement on Vehicle | Rear Axle |
Type | Gasket Set, wheel hub |
Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (18201)
- 1x Febi Seal Ring, wheel hub (09827)
- 1x Febi Shaft Seal, wheel bearing (18200)
- 4x Febi Seal Ring, wheel hub (02191)
- 2x Febi Circlip, brake anchor pin (04767)
- 1x Febi Washer (10405)
Important compatibility info
Weight | 0.811 kg |
Paired article numbers | 106304 |
Function | Suspension Strut Support Mount |
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | FPM (fluoride rubber), NBR (nitrile butadiene rubber) |
Weight | 0.250 kg |
Function | Gasket Set, wheel hub |
Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.61 kg |
Length | 2000 mm |
Function | Speedometer Cable |
Driver Position | for right-hand drive vehicles |
Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | both sides |
Length | 375 mm |
Housing Diameter | 18 mm |
Eject Force | 340 N |
Stroke | 144 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 206 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.235 kg |
Material | Metal |
Thickness | 1.57 mm |
Notches / Holes Number | 2 |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2475 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Weight | 0.410 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.098 kg |
Function | Linkage Damper, injection system |
Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with squeeze connector |
Cable Length | 350 mm |
Number of circuits | 12 |
Function | Cable Repair Kit, tailgate |
Weight | 0.083 kg |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Plug Type ID | FAKRA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Rod/Strut | Pull Rod |
Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
Length | 384 mm |
Material | Cast Steel |
Additional Information 2 | with rubber mount |
Weight | 1.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Weight | 1.72 kg |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
for OE number | 06 52 125 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.6 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | BP4N-39-070D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.264 kg |
Width of castor bearing surface | 26 mm |
Material | Metal |
Outer diameter | 76 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Paired article numbers | 103462 |
Material | Rubber/Metal |
Width | 124 mm |
Height | 55 mm |
Length | 232 mm |
Placement on Vehicle | Rear Axle Left |
Weight | 0.71 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Type | Breather Valve, fuel tank |
Number of Connectors / Ports | 2 |
Height | 25 mm |
Length | 65 mm |
Function | Breather Valve, fuel tank |
Width | 45 mm |
Weight | 0.10 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.285 kg |
Placement on Vehicle | Front Axle |
Length | 113.9 mm |
Width | 62 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Weight | 0.05 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 18.2 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Width | 81 mm |
Length | 89.7 mm |
Placement on Vehicle | Front Axle |
Weight | 1.646 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023