Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 90 mm |
Inner diameter 2 | 76 mm |
Inner diameter 1 | 22 mm |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 78 mm |
Length | 92 mm |
Inner diameter 1 | 23 mm |
Type | Bellow Kit, drive shaft |
Replaces | BCB2186 |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 123 mm |
Inner diameter 2 | 92 mm |
Inner diameter 1 | 28 mm |
Material | Thermoplast |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 80 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Inner diameter 1 | 27 mm |
Length | 102 mm |
Additional Information 2 | with clamps |
Important compatibility info
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 260 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6612 |
Important compatibility info
Thread Measurement 2 | M10X1.25 |
Thread Size | M10X1.25 |
Length | 250 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6863 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 72 mm |
Type | Link/Coupling Rod, stabiliser bar |
Important compatibility info
Thread Measurement 2 | M12X1.5 |
Thread Size | M12X1.5 |
Length | 340 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left |
Important compatibility info
Height | 46 mm |
Width | 52 mm |
Outer diameter | 13 mm |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Length | 185 mm |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Important compatibility info
Length | 682 mm |
Function | Brake Hose |
Thread Type | with internal thread |
Type | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with banjo fitting |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M12x1 |
Important compatibility info
Thread Size | M20X1.5 |
Function | Nut, kingpin |
Type | Nut, kingpin |
Placement on Vehicle | Rear Axle |
Important compatibility info
Function | Air Filter |
Width | 171 mm |
Length | 379 mm |
Type | Air Filter |
Height | 50 mm |
Filter type | Filter Insert |
Important compatibility info
Important compatibility info
Height | 175 mm |
Outer diameter | 85 mm |
Filter type | In-Line Filter |
Inlet Diameter | 8 mm |
Outlet Diameter | 8 mm |
Function | Fuel filter |
Type | Fuel filter |
Important compatibility info
Height | 200 mm |
Outer diameter | 72 mm |
Inner diameter | 29 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Important compatibility info
Number of Teeth, ABS ring | 48 |
Seal Diameter | 72 mm |
Internal Teeth, wheel side | 27 |
External Teeth, Wheel Side | 40 |
Length | 116 mm |
Function | Joint Kit, drive shaft |
Additional Information 2 | with groove |
Type | Joint Kit, drive shaft |
Technical Information Number | Middle groove |
Thread Size | M10X1,5 |
Important compatibility info
Type | Joint Kit, drive shaft |
Thread Size | M22X1,5 |
Length | 146 mm |
External Teeth, Wheel Side | 26 |
Internal Teeth, wheel side | 26 |
Seal Diameter | 54 mm |
Technical Information Number | Middle groove |
Additional Information 2 | with groove |
Function | Joint Kit, drive shaft |
Important compatibility info
Height | 105 mm |
Outer diameter | 64 mm |
Inner diameter | 31 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Important compatibility info
Function | Drive Shaft |
Length | 1140 mm |
Type | Drive Shaft |
External Teeth, Diff.Side | 41 |
External Teeth, Wheel Side | 35 |
Placement on Vehicle | Front Axle Right |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1196)
Important compatibility info
Function | Drive Shaft |
External Teeth, Wheel Side | 35 |
External Teeth, Diff.Side | 41 |
Number of Teeth, ABS ring | 54 |
Length | 1085 mm |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023