Important compatibility info
Weight | 0.683 kg |
Placement on Vehicle | Rear Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | without ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (32164)
- 1x Febi Nut (37956)
- 1x Febi Screw (39539)
- 2x Febi Screw (37958)
- 1x Febi Nut (37957)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 346 mm |
Outer diameter | 152 mm |
Weight | 1.97 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Type | Sensor, fuel pressure |
Function | Sensor, fuel pressure |
Weight | 0.03 kg |
for OE number | 006 153 74 28 |
Number of Connectors / Ports | 3 |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 176681 |
Weight | 0.064 kg |
Type | Washer Fluid Jet, headlight cleaning |
Function | Washer Fluid Jet, headlight cleaning |
Extra Description | febi Plus |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Length | 38 mm |
Outer diameter | 60 mm. 46 mm |
Inner diameter | 19.8 mm |
Function | Mounting, control/trailing arm |
Additional Information | with nuts |
Extra Description | ProKit |
Weight | 0.790 kg |
Additional Information 2 | with bolts/screws |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (40971)
- 1x Febi Bolt, control arm (43584)
- 1x Febi Washer (21558)
- 1x Febi Nut (43582)
- 1x Febi Bolt, control arm (43586)
- 2x Febi Nut (22263)
- 2x Febi Bolt, control arm (43585)
- 1x Febi Nut (21557)
Important compatibility info
Type | Glow Plug |
Voltage | 11 V |
Glow Plug Type | after-glow capable |
Fitting Depth | 22 mm |
Weight | 0.030 kg |
Spanner Size | 12 |
Function | Glow Plug |
Length | 81.5 mm |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.010 kg |
Paired article numbers | 32862 |
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Placement on Vehicle | both sides |
Length | 588 mm |
Housing Diameter | 18 mm |
Eject Force | 400 N |
Stroke | 205 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 354.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 21.6 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Weight | 1.87 kg |
Mounting points diameter | 12 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.186 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 78 |
Function | Chain, oil pump drive |
Type | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.027 kg |
Placement on Vehicle | frontal sided |
Width | 10 mm |
Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
Outer diameter | 65 mm |
Inner diameter | 48 mm |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Filter type | In-Line Filter |
Weight | 0.238 kg |
Outer diameter | 70 mm |
Pipe Diameter | 8 mm |
Type | Fuel filter |
Housing material | Plastic |
Function | Fuel filter |
Internal Thread Size | M12 x 1 |
Material | Paper |
Height | 159 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 58 mm |
Placement on Vehicle | Wheel Side |
Length | 143 mm |
Outer diameter | 83 mm |
External Teeth, Wheel Side | 24 |
Internal Teeth, wheel side | 23 |
Weight | 1.910 kg |
Number of Teeth, ABS ring | 48 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Material | ACM (Polyacrylate) |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Length | 420 mm |
Height | 3.6 mm |
Width | 163 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.50 kg |
Function | Brake Shoe Set, parking brake |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 4.5 mm |
Outer diameter | 200 mm |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Inner diameter | 37 mm |
Weight | 0.745 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Additional Information | with axle nut |
Outer diameter | 72 mm |
Additional Information 2 | with integrated magnetic sensor ring, with grease cap, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.245 kg |
Placement on Vehicle | both sides |
Length | 500 mm |
Housing Diameter | 18 mm |
Eject Force | 460 N |
Stroke | 199 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 276.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 195 mm |
Height | 37 mm |
Width | 190 mm |
Filter type | Pollen Filter, Filter Insert |
Weight | 0.07 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Expansion Tank, coolant |
Weight | 0.2 kg |
Material | Plastic |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Coolant Pipe |
Weight | 0.43 kg |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023