Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 38997 |
| Placement on Vehicle | Front Axle Right |
| Function | Tie Rod |
| Weight | 1.08 kg |
| Additional Information | with grease |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (17768)
- 1x Febi Tie Rod End (10659)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
£26.61
Important compatibility info
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Weight | 1.72 kg |
| Type | Suspension Spring |
| Outer diameter | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.61
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right, Upper |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 183595 |
| Weight | 1.449 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.60
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 183594 |
| Weight | 1.449 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
| Placement on Vehicle | Rear Axle Left, Upper |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.60
Important compatibility info
| Weight | 0.380 kg |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.60
Important compatibility info
| Opening Temperature | 95 °C |
| Function | Thermostat, coolant |
| Replaces | 34876 |
| Type | Thermostat, coolant |
| Weight | 0.100 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.59
Important compatibility info
| Weight | 1.987 kg |
| Width | 139 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 45 mm |
| Inner diameter | 31.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
| Outer diameter 1 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.59
Important compatibility info
| Weight | 0.06 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 945 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.58
Important compatibility info
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.194 kg |
| Length | 1986 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 144.8 mm |
| Width | 75.5 mm |
| Inspection Tag | ECE R90 Approved |
| Weight | 2.178 kg |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.58
Important compatibility info
| Weight | 0.86 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.58
Important compatibility info
| Weight | 0.155 kg |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Resistance | 1250 Ohm |
| Cable Length | 1980 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
| Length | 2030 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Weight | 0.66 kg |
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, differential |
| Type | Gasket Set, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, differential (29782)
- 1x Febi Shaft Seal, differential (29783)
£26.57
Important compatibility info
| Number of circuits | 4 |
| Cable Length | 100 mm |
| Function | Cable Repair Set, interior blower motor |
| Extra Description | febi Plus |
| Type | Cable Repair Set, interior blower motor |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Weight | 0.037 kg |
| Number of Connectors / Ports | 4 |
| Type | Resistor, interior blower |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Length | 2120 mm |
| Function | Sensor, wheel speed |
| Weight | 0.152 kg |
| Cable Length | 2070 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle, Front Axle |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Outer diameter | 109 mm |
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Spring |
| Weight | 1.92 kg |
| Length | 338 mm |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Outer diameter | 75 mm |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 22 |
| Weight | 1.700 kg |
| Type | Joint Kit, drive shaft |
| Length | 140 mm |
| External Thread Size | M20 x 1,5 |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Shaft Seal, differential |
| Sealing lip material | FPM (fluoride rubber) |
| Type | Shaft Seal, differential |
| Outer diameter 1 | 135 mm |
| Weight | 0.27 kg |
| Inner diameter | 80 mm |
| Thickness | 18 mm |
| Outer diameter | 154 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
Important compatibility info
| Type | Spring, driver cab suspension |
| Function | Spring, driver cab suspension |
| Weight | 2.0 kg |
| Placement on Vehicle | Front, Rear |
| Thickness | 266 mm |
| Outer diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.57
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023