Important compatibility info
Additional Information | with fastening/mounting material, with shaft seals |
Weight | 0.16 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 18 mm |
Outer diameter | 80 mm |
Inner diameter | 40 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Length | 530 mm |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Cable Length | 500 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.108 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 229 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 5 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Length | 779 mm |
Housing Diameter | 18 mm |
Eject Force | 285 N |
Stroke | 274 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 402 mm |
Weight | 0.25 kg |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.754 kg |
Spanner Size | 21 |
Bolt Head/Nut Design | Hexagon Socket |
Cone Size | 16.5 mm |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M14 x 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 105 mm |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (47156)
- 1x Febi Nut (47269)
Important compatibility info
Weight | 0.72 kg |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Left |
Function | Mounting, engine |
for OE number | 8D0 199 379 AQ |
External Thread Size | M8 x 1,25 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 58 0156 3630 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Weight | 0.253 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 88 mm |
Width | 58 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Weight | 0.09 kg |
Inner diameter | 19 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gear Lever Knob |
Weight | 0.325 kg |
Function | Gear Lever Knob |
Internal Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Width | 29 mm |
Outer diameter | 60 mm |
Mounting points diameter | 8.2 mm |
Type | Tensioner Pulley, timing belt |
Function | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.310 kg |
Placement on Vehicle | Rear Axle |
Length | 141.5 mm. 140.2 mm |
Width | 59.4 mm. 50.8 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pressure Control Valve |
Length | 54 mm |
Spanner Size | 22 |
Opening Pressure | 15 bar |
Weight | 0.092 kg |
External Thread Size | M16 x 1,5 |
Type | Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.160 kg |
Material | Aluminium |
Type | Screw Set, cylinder head cover |
Function | Screw Set, cylinder head cover |
Extra Description | febi Plus |
Additional Information
Technical Information
This article is designed to be disposable, and must be replaced each time they are used.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 19x Febi Bolt, cylinder head cover (49849)
- 3x Febi Bolt, cylinder head cover (49850)
Important compatibility info
Weight | 1.080 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Width | 31 mm |
Width of castor bearing surface | 31 mm |
Outer diameter | 65 mm |
Weight | 0.214 kg |
Mounting points diameter | 17 mm |
Type | Tensioner Pulley, v-ribbed belt |
Function | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Thickness | 7 mm |
Weight | 0.060 kg |
Type | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 85 mm |
Inner diameter | 13 mm |
Function | Mounting, control/trailing arm |
Length | 85 mm |
Width | 69 mm |
Material | Rubber/Metal |
Outer diameter | 61 mm |
Placement on Vehicle | Outer, Rear Axle Left, Rear Axle Right |
Weight | 0.38 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 2244 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Weight | 0.154 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | without ball bearing |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Weight | 0.922 kg |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.7 kg |
Placement on Vehicle | Front Axle |
Length | 146.4 mm |
Width | 59.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023