Proud to be a UK-based company
Contact us
Important compatibility info
| Housing length | 278 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 506 mm |
| Eject Force | 610 N |
| Stroke | 197 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.353 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Weight | 0.02 kg |
| for OE number | 39300-03000 |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Outer, Rear Axle Right |
| Steering arm type | Control Arm |
| Material | Steel |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 14 mm |
| Weight | 0.771 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Weight | 0.720 kg |
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1348993080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 140 mm |
| Outer diameter | 172 mm |
| Inner diameter | 92 mm |
| Function | Shaft Seal, crankshaft |
| Seal Material | FPM (fluoride rubber) |
| Weight | 0.181 kg |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Height | 152 mm |
| Function | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Outer diameter | 92 mm |
| Extra Description | febi Plus |
| Bolt Head/Nut Design | Male Hex |
| Spanner Size | 36 |
| Type | Cap, oil filter housing |
| Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Weight | 0.72 kg |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Weight | 0.753 kg |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| for OE number | 4060A417 |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106636 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1864 mm |
| Weight | 0.072 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Thickness/Strength 1 | 16.7 mm |
| Width | 55.9 mm |
| Placement on Vehicle | Front Axle |
| Length | 142.6 mm |
| Weight | 1.532 kg |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information | with retaining spring holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Outer diameter | 60 mm |
| Weight | 0.265 kg |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.012 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 25085-00Q0B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.230 kg |
| Height | 450 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 182 mm |
| Inner diameter | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 24 |
| Weight | 1.966 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.406 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.03 kg |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Function | Mounting, engine |
| Weight | 0.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 1.980 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without rubber mount(s), without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.15 kg |
| Placement on Vehicle | Rear Axle |
| Width | 25 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 6 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Type | Intake Valve |
| Weight | 0.213 kg |
| Notches / Holes Number | 1 |
| Valve stem diameter | 9.970 mm |
| Valve head diameter | 47 mm |
| Function | Intake Valve |
| Length | 199.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023