Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.612 kg |
| Type | Bolt, release fork |
| Function | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bearing, clutch lever (12260)
- 2x Febi Circlip, kingpin (02668)
- 2x Febi Shaft Seal, clutch release bearing shaft (32481)
- 1x Febi Bolt, release fork (31868)
- 2x Febi Circlip (05336)
£25.54
Important compatibility info
| Weight | 0.130 kg |
| Placement on Vehicle | transmission sided |
| Inner diameter | 83.6 mm |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.230 kg |
| Height | 450 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 182 mm |
| Inner diameter | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Weight | 1.980 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without rubber mount(s), without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.148 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 64 |
| Timing Chain Size | G53HP, G53HR |
| Function | Chain, oil pump drive |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Function | Mounting, engine |
| Weight | 0.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.03 kg |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.08 kg |
| Outer diameter | 35 mm |
| Opening Temperature | 82 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.37 kg |
| Placement on Vehicle | Lower, Centre |
| Length | 157 mm |
| Width | 70 mm |
| Thickness | 48 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Outer diameter | 60 mm |
| Weight | 0.265 kg |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Housing length | 184.5 mm |
| Mounting points diameter | 15 mm |
| Placement on Vehicle | both sides |
| Length | 314 mm |
| Eject Force | 485 N |
| Stroke | 92 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.171 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.514 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 20 |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Wheel Side |
| External Teeth, Wheel Side | 24 |
| ABS Ring Diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.057 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1056 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.012 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 25085-00Q0B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Type | Fuel filter |
| Pipe Diameter | 11.5 mm |
| Weight | 0.44 kg |
| Function | Fuel filter |
| Additional Information | with valve |
| Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
| Height | 143 mm |
| Outer diameter | 98 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 24 |
| Weight | 1.966 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
| Weight | 1.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.13 kg |
| Housing material | Aluminium |
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 20 mm |
| Eject Force | 520 N |
| Stroke | 95 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 162.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.406 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Type | Intake Valve |
| Weight | 0.213 kg |
| Notches / Holes Number | 1 |
| Valve stem diameter | 9.970 mm |
| Valve head diameter | 47 mm |
| Function | Intake Valve |
| Length | 199.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023