Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.95 kg |
| Placement on Vehicle | Rear Axle |
| Length | 102.3 mm |
| Width | 48.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.19
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Paired article numbers | 193833 |
| Weight | 0.360 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.19
Important compatibility info
| Weight | 0.649 kg |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right, Front |
| Material | Rubber/Metal |
| Outer diameter | 69 mm |
| Thickness | 85 mm |
| Inner diameter | 12 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.18
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Right |
| Length | 127 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 38 mm |
| Inner diameter 2 | 92 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (177576)
- 1x Febi Molybdenum Grease (02582)
£24.18
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Weight | 1.167 kg |
| Paired article numbers | 176917 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37593)
- 1x Febi Inner Tie Rod (39358)
£24.18
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Weight | 1.167 kg |
| Paired article numbers | 176916 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37594)
- 1x Febi Inner Tie Rod (39358)
£24.18
Important compatibility info
| Additional Information 2 | without wheel bearing |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter | 140 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Bolt Hole Circle Diameter | 114 mm |
| Inner diameter | 29 mm |
| Weight | 1.851 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 53 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.18
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Paired article numbers | 48224 |
| Weight | 0.44 kg |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.18
Important compatibility info
| Function | Resistor, interior blower |
| Weight | 0.14 kg |
| Type | Resistor, interior blower |
| Number of Connectors / Ports | 5 |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.18
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 76.8 mm |
| Width | 65.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Type | Brake Pad Set, disc brake |
| Weight | 0.954 kg |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.17
Important compatibility info
| Height | 5 mm |
| Function | Gasket, intake manifold |
| Type | Gasket, intake manifold |
| Weight | 0.009 kg |
| Material | FPM (fluoride rubber) |
| Width | 39 mm |
| Length | 223 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.17
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 177.9 kg |
| Type | Accessory Kit, brake shoes |
| Function | Accessory Kit, brake shoes |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 176695 |
| Weight | 0.360 kg |
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.17
Important compatibility info
| Weight | 0.275 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Type | Speedometer Cable |
| Length | 1420 mm |
| Function | Speedometer Cable |
| Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter 1 | 71 mm |
| Number of Ribs | 6 |
| Outer diameter | 65 mm |
| Material | Plastic |
| Weight | 0.15 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| for OE number | 32222101 |
| Weight | 0.473 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Tightening Torque | 25 Nm |
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Weight | 0.096 kg |
| Bolt Head/Nut Design | Male Hex |
| Additional Information 2 | with seal ring |
| Spanner Size | 24 |
| Outer diameter | 65 mm |
| Height | 90.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Filter type | Filter Insert |
| Outer diameter | 76 mm |
| Height | 110 mm |
| Function | Fuel filter set |
| Weight | 0.11 kg |
| Type | Fuel filter set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| for OE number | 45503-29575 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Length | 245 mm |
| External Thread Size | M14 x 1,5, M15 x 1,5 |
| Additional Information | with counter nut |
| Weight | 0.66 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.16
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 715 mm |
| Weight | 0.056 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Weight | 0.221 kg |
| Width | 26 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 31.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.02 kg |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 036 906 051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Outer diameter | 30 mm |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Weight | 0.042 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Weight | 0.02 kg |
| Length | 50 mm |
| Width | 40 mm |
| Thickness | 24 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Function | Bushing, axle beam |
| Thickness | 91 mm |
| Material | Rubber/Metal |
| Weight | 0.270 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| ABS Ring Diameter | 72 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 23 |
| Internal Teeth, wheel side | 20 |
| Weight | 1.620 kg |
| Number of Teeth, ABS ring | 43 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Function | Bushing, axle beam |
| Weight | 0.836 kg |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.14
Important compatibility info
| Weight | 1.222 kg |
| Placement on Vehicle | Rear Axle |
| Length | 116.8 mm |
| Width | 48.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.14
Important compatibility info
| Type | Repair Kit, suspension strut support mount |
| Weight | 0.800 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31475)
- 4x Febi Screw (194491)
- 1x Febi Nut (10893)
£24.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023