Important compatibility info
Weight | 0.02 kg |
Length | 50 mm |
Width | 40 mm |
Thickness | 24 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Type | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 30 mm |
Opening Temperature | 88 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.042 kg |
Additional Information | with gasket/seal |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repair Kit, suspension strut support mount |
Weight | 0.800 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31475)
- 4x Febi Screw (194491)
- 1x Febi Nut (10893)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with washers, with bolts/screws |
Weight | 1.0 kg |
Type | Ball Joint |
Function | Ball Joint |
Cone Size 2 | 24 mm |
Cone Size 1 | 16 mm |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.222 kg |
Placement on Vehicle | Rear Axle |
Length | 116.8 mm |
Width | 48.3 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 238 mm |
Material | Steel |
Thickness | 66 mm |
Spanner Size | 17 |
Paired article numbers | 07778 |
Colour | Black |
Thread Length | 20 mm. 51 mm |
Thread Type | with right-hand thread, with left-hand thread |
Function | Tie Rod |
Weight | 0.66 kg |
Extra Description | ProKit |
External Thread Size | M10 x 1,25, M12 x 1,5 |
Type | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.64 kg |
Length | 238 mm |
Material | Steel |
Thickness | 66 mm |
Spanner Size | 17 |
Paired article numbers | 07779 |
Colour | Green |
Thread Length | 20 mm. 51 mm |
Thread Type | with right-hand thread, with left-hand thread |
Function | Tie Rod |
External Thread Size | M10 x 1,25, M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.104 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 56 |
Function | Chain, oil pump drive |
Type | Chain, oil pump drive |
Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Angled Ball Joint, steering push rod |
Replaces | 24607 |
External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
Weight | 1.736 kg |
Length | 140 mm |
Thread Type | with right-hand thread |
Cone Size | 30 mm |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with oil sump gasket |
Weight | 0.235 kg |
Length | 180 mm |
Height | 71 mm |
Width | 157 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.62 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.28 kg |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 39565 |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Steering | with tie rod end |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31696)
- 1x Febi Tie Rod End (37692)
Important compatibility info
Weight | 0.298 kg |
Length | 263 mm |
Outer diameter | 55 mm |
Filter type | In-Line Filter |
Pipe Diameter | 8 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.344 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with fastening/mounting material |
Function | Tie Rod |
Steering | with tie rod end |
Type | Tie Rod |
External Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109568)
- 1x Febi Inner Tie Rod (103145)
Important compatibility info
Weight | 1.4 kg |
Placement on Vehicle | Rear Axle |
Length | 116.2 mm |
Width | 58.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.530 kg |
Placement on Vehicle | Rear Axle |
Width | 39 mm |
Outer diameter | 203 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 4 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
Weight | 1.759 kg |
Placement on Vehicle | Front Axle |
Length | 150 mm |
Width | 40 mm |
Thickness | 121 mm |
Cone Size | 30 mm |
Function | Tie Rod End |
Thread Type | with right-hand thread |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.180 kg |
for OE number | 1323.FA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.43 kg |
Placement on Vehicle | Front Axle |
Length | 304 mm |
Outer diameter | 141 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | both sides |
Length | 507 mm |
Housing Diameter | 19 mm |
Eject Force | 420 N |
Stroke | 206 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 278.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Type | Fuel filter |
Filter type | In-Line Filter, without connection for water sensor, without water separator |
Height | 223 mm |
Weight | 0.508 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Right |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.330 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.185 kg |
for OE number | 1323.W7 |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hydraulic Filter Kit, automatic transmission |
Weight | 0.360 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information 2 | with seal ring, with bolts/screws |
Additional Information | with gasket/seal |
Seal Material | Paper |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (29894)
- 1x Febi Seal Ring, hydraulic filter (11673)
- 2x Febi Screw (11674)
Important compatibility info
Additional Information 2 | without lid |
Weight | 0.184 kg |
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 1323.AC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 103 mm |
Outer diameter | 71 mm |
Additional Information 2 | with seal ring |
Inner diameter | 24 mm |
Filter type | Filter Insert, with housing cover |
Spanner Size | 32 |
Weight | 0.175 kg |
Tightening Torque | 25 Nm |
Type | Oil Filter |
Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Weight | 0.159 kg |
Length | 2482 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 03 44 513 S1 |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Weight | 0.584 kg |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (05155)
- 1x Febi Rolling Bearing, suspension strut support mount (01874)
Important compatibility info
Additional Information 2 | with quick couplers |
Cooling Hose | from thermostat to radiator |
Weight | 0.294 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Function | Radiator Hose |
Type | Radiator Hose |
Hose Length | 205 mm |
for OE number | 17 12 7 536 231 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 19 mm |
Outer diameter | 62 mm |
Inner diameter | 35 mm |
Function | Wheel Bearing |
Weight | 0.212 kg |
Type | Wheel Bearing |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.655 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 31262714 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.348 kg |
Length | 2140 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 9 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Weight | 0.380 kg |
Fill quantity | 1 l |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.15 kg |
Placement on Vehicle | frontal sided |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shifting Points | 5.2 bar |
Weight | 0.95 kg |
Number of Connectors / Ports | 3 |
Spanner Size | 17 |
Length | 89 mm |
Type | Sensor, compressed-air system |
Function | Sensor, compressed-air system |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 78 |
Width | 24 mm |
Function | Timing Belt |
Weight | 0.082 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 314 mm |
Housing Diameter | 19 mm |
Eject Force | 430 N |
Stroke | 84 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Housing length | 170.5 mm |
Function | Gas Spring, bonnet |
Weight | 0.20 kg |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Material | ACM (Polyacrylate) |
Weight | 0.058 kg |
Type | Gasket, cylinder head cover |
for OE number | 13270-1HC0A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hose Length | 470 mm |
Weight | 0.284 kg |
Additional Information | with quick coupling |
Function | Radiator Hose |
Cooling Hose | from engine to thermostat |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width | 280 mm |
for OE number | 11 53 7 541 992 |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.525 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Material | Cast Iron |
Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 516 mm |
Housing Diameter | 19 mm |
Mounting points diameter | 17.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 289 mm |
Weight | 0.344 kg |
Stroke | 206 mm |
Eject Force | 240 N |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 1735 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 404 mm |
Weight | 0.244 kg |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 220.5 mm |
Stroke | 160 mm |
Eject Force | 200 N |
Housing Diameter | 19 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Length | 571 mm |
Placement on Vehicle | both sides |
Stroke | 221 mm |
Eject Force | 520 N |
Housing Diameter | 19 mm |
Weight | 0.35 kg |
Type | Gas Spring, boot/cargo area |
Housing length | 306.5 mm |
Mounting points diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | HNBR (hydrogenated nitrile butadiene rubber) |
Function | Gasket Kit, timing case |
Type | Gasket Kit, timing case |
Weight | 0.030 kg |
Thickness | 1.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Placement on Vehicle | Rear Axle |
Length | 90 mm |
Material | Rubber/Metal |
Outer diameter | 44.5 mm |
Inner diameter | 12 mm |
Function | Bush Set, axle beam |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (03671)
- 2x Febi Bolt, axle beam mounting (01198)
- 2x Febi Nut (05139)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 900 mm |
Function | Sensor, wheel speed |
Weight | 0.057 kg |
Type | Sensor, wheel speed |
for OE number | 51799347 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 116.4 mm |
Width | 65.5 mm. 55.3 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 1.516 kg |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Finger Follower, engine timing |
Type | Finger Follower, engine timing |
Weight | 0.057 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.169 kg |
Length | 211.5 mm |
Colour | Black |
Outer diameter 1 | 8 mm |
Outer diameter 2 | 24 mm |
Stroke | 30 mm |
Function | Buffer, engine mounting |
Type | Buffer, engine mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023