Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 881 mm |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Bore Diameter | 17 mm |
| Weight | 12.500 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.67
Important compatibility info
| Weight | 8.32 kg |
| Hole Spacing | 130 mm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 515 mm |
| Steering arm type | Trailing Arm |
| Mounting points diameter | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.38
Important compatibility info
| Operating Mode | Automatic |
| Weight | 1.155 kg |
| Width of castor bearing surface | 31 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Vehicle Main Current | for vehicles with 48V main current |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.32
Important compatibility info
| Length | 1122 mm |
| Number of Ribs | 8 |
| Weight | 1.407 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (179891)
- 1x Febi Belt Tensioner, v-ribbed belt (176489)
£154.18
Important compatibility info
| Weight | 2.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 383 mm |
| Min. Length | 291 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Weight | 4.801 kg |
| Length 1 | 1512 mm |
| Function | V-Ribbed Belt Set |
| Extra Description | ProKit |
| Type | V-Ribbed Belt Set |
| Units / Pulleys | incl. deflection pulley |
| Length 2 | 1515 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Additional Information | with clamping elements |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29123)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
£154.18
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Pipe Diameter | 62 mm |
| Max. Length | 347 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 3.3 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Weight | 5.00 kg |
| Function | V-Ribbed Belt Set |
| Length 1 | 1512 mm |
| Number of ribs 2 | 8 |
| Type | V-Ribbed Belt Set |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
| Length 2 | 1538 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29063)
- 1x Febi V-Ribbed Belt (40706)
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Belt Tensioner, v-ribbed belt (27117)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
£154.18
Important compatibility info
| Pulleys | with freewheel belt pulley |
| Number of Ribs | 7 |
| Voltage | 12 V |
| Type | Alternator |
| Function | Alternator |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 59 mm |
| Weight | 6.94 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Weight | 0.46 kg |
| Inner diameter | 8.3 mm |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 4 |
| Cable Length | 280 mm |
| Valve type | Shut-Off Valve |
| Function | EGR valve, exhaust control |
| External Thread Size | M8 x 1,25 |
| Type | EGR valve, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Additional Information 2 | without spacer plate |
| Weight | 2.18 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Seal Material | Rubber/Metal |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Number of grooves | 5 |
| Weight | 1.30 kg |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.18
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Width | 120 mm |
| Outer diameter | 90 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 1.047 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£154.03
Important compatibility info
| Weight | 3.485 kg |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.99
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 635 mm |
| Min. Length | 386 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Weight | 5.76 kg |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20348 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Front Axle |
| Max. Length | 657 mm |
| Min. Length | 403 mm |
| Pipe Diameter | 75 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 4.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
Important compatibility info
| Function | Shock Absorber |
| Mounting points diameter | 16 mm. 20 mm |
| Pipe Diameter | 60 mm. 70 mm |
| Max. Length | 804 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Piston conrod diameter | 16 mm |
| Min. Length | 485 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Weight | 4.5 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 5.3 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 735 mm |
| Min. Length | 455 mm |
| Pipe Diameter | 75 mm. 64 mm |
| Mounting points diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 3.85 kg |
| Pipe Diameter | 70 mm. 51 mm |
| Mounting points diameter | 20 mm. 16 mm |
| Placement on Vehicle | Front Axle |
| Piston conrod diameter | 18 mm |
| Function | Shock Absorber |
| Min. Length | 407 mm |
| Max. Length | 657 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 6.89 kg |
| Max. Length | 774 mm |
| Placement on Vehicle | Rear Axle |
| Piston conrod diameter | 22 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Min. Length | 470 mm |
| Shock Absorber Type | Oil Pressure |
| Type | Shock Absorber |
| Replaces | 20150 |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£153.93
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023