Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.41
Important compatibility info
| Weight | 4.73 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 710 mm |
| Min. Length | 445 mm |
| Pipe Diameter | 70 mm. 60 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Replaces | 20130 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.38
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Min. Length | 413 mm |
| Pipe Diameter | 60 mm. 45 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 703 mm |
| Shock Absorber Type | Oil Pressure |
| External Thread Size | M14 x 1,5 |
| Weight | 2.77 kg |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.35
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.051 kg |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.29
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.26
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| Paired article numbers | 186063 |
| External Teeth, Wheel Side | 30 |
| Weight | 8.160 kg |
| External Teeth, Diff.Side | 29 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.23
Important compatibility info
| Weight | 1.93 kg |
| Type | Brake Master Cylinder |
| Function | Brake Master Cylinder |
| Material | Cast Iron |
| Piston Diameter | 31.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.18
Important compatibility info
| Weight | 2.5 kg |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.17
Important compatibility info
| Weight | 5.6 kg |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.17
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Stabiliser Diameter | 33 mm |
| Weight | 5.53 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171136)
- 1x Febi Link/Coupling Rod, stabiliser bar (21357)
- 1x Febi Link/Coupling Rod, stabiliser bar (21358)
- 2x Febi Screw (22248)
- 4x Febi Nut (06877)
£155.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023