Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1680 mm |
| Function | Cable Pull, parking brake |
| Weight | 1.350 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.6 kg |
| Length | 2050 mm |
| Function | Speedometer Cable |
| Driver Position | for right-hand drive vehicles |
| Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Height | 61.4 mm |
| Weight | 0.125 kg |
| Outer diameter | 87.4 mm |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 1.06 kg |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Replaces | 37931 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10732)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£23.12
Important compatibility info
| Weight | 0.660 kg |
| Placement on Vehicle | Centre, Rear Axle Left, Rear Axle Right |
| Steering arm type | Control Arm |
| Rod/Strut | Push Rod |
| Material | Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 1.0 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 226 mm |
| Width | 117 mm |
| Thickness | 83 mm |
| Paired article numbers | 33110 |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (12565)
- 1x Febi Inner Tie Rod (23221)
£23.12
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 03C 103 464 D |
| Weight | 0.047 kg |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 1.493 kg |
| Placement on Vehicle | Rear Axle |
| Length | 129 mm |
| Width | 59.1 mm |
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 10 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 0.698 kg |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 47 mm |
| Outer diameter | 70 mm. 125 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.391 kg |
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| for OE number | 204 501 31 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Width 1 | 27 mm |
| Weight | 0.139 kg |
| Width | 29.3 mm |
| Material | Plastic |
| Outer diameter | 54 mm |
| Inner diameter | 10.4 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width 2 | 29.3 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Inner diameter | 18 mm |
| Weight | 0.188 kg |
| Outer diameter | 58 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Material | PU (Polyurethane) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (40088)
- 2x Febi Rubber Buffer, suspension (38573)
£23.12
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of grooves | 8 |
| Function | Oil Cooler, engine oil |
| Weight | 0.324 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.581 kg |
| Length | 73 mm |
| Outer diameter | 78 mm |
| Paired article numbers | 23318 |
| Placement on Vehicle | Rear Axle Left |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| External Thread Size | M24 x 1,5, M12 x 1,25 |
| Weight | 1.13 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 273 mm |
| Thickness | 75 mm |
| Spanner Size | 19 |
| Paired article numbers | 41090 |
| Function | Tie Rod End |
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 473 mm |
| Housing Diameter | 18 mm |
| Eject Force | 540 N |
| Stroke | 162 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 279 mm |
| Weight | 0.236 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.020 kg |
| Length | 51.1 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.112 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 2595 mm |
| Paired article numbers | 104533 |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2485 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing, with fastening material |
| Weight | 0.82 kg |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08157)
- 1x Febi Rubber Buffer, suspension (26929)
- 1x Febi Nut (37674)
£23.12
Important compatibility info
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 286.5 mm |
| Placement on Vehicle | both sides |
| Eject Force | 460 N |
| Length | 493 mm |
| Stroke | 168 mm |
| Housing Diameter | 18 mm |
| Weight | 0.24 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.093 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left |
| Cable Length | 1000 mm |
| Function | Sensor, wheel speed |
| Paired article numbers | 175407 |
| Type | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Housing length | 130.5 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.147 kg |
| Placement on Vehicle | both sides |
| Length | 223 mm |
| Eject Force | 500 N |
| Stroke | 71 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Inner diameter 1 | 49 mm |
| Inner diameter 2 | 49 mm |
| Function | Charge Air Hose |
| Weight | 0.160 kg |
| Additional Information 2 | with clamp |
| Placement on Vehicle | Charge Air Cooler, Left, Right |
| Type | Charge Air Hose |
| Turbocharger line | Piping to charge air cooler, Charge air cooler to piping |
| Hose Length | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Lower |
| Material | Rubber |
| Outer diameter | 45 mm. 32 mm |
| Inner diameter | 35 mm. 24 mm |
| Colour | Black |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Inner diameter 2 | 17.5 mm |
| Weight | 0.119 kg |
| Material | Rubber |
| Inner diameter | 17.5 mm |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
| Inner diameter 1 | 13.5 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.122 kg |
| Length | 361 mm |
| Eject Force | 100 N |
| Stroke | 138 mm |
| Housing length | 195.5 mm |
| Placement on Vehicle | both sides |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, rear window |
| Type | Gas Spring, rear window |
| Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.331 kg |
| Length | 2560 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.831 kg |
| Seal Material | Paper |
| Number of Teeth | 20 |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 1201.61 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.02 kg |
| Function | Glow Plug, parking heater |
| Spanner Size | 13 |
| Voltage | 8 V |
| Length | 55 mm |
| External Thread Size | M4 |
| Type | Glow Plug, parking heater |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Outer diameter | 58 mm |
| Additional Information | with gasket/seal, with quick coupling |
| Turbocharger line | Charge air cooler to intake manifold |
| Outer diameter 1 | 65 mm |
| Function | Charge Air Hose |
| Inner diameter | 49 mm |
| Weight | 0.18 kg |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023