Important compatibility info
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 985 mm |
Number of Connectors / Ports | 2 |
Cable Length | 880 mm |
Weight | 0.05 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Rear Axle Right |
Function | Sensor, wheel speed |
Length | 1400 mm |
Paired article numbers | 101793 |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Cable Length | 1330 mm |
Weight | 0.126 kg |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
Placement on Vehicle | both sides |
Length | 500 mm |
Housing Diameter | 22 mm |
Eject Force | 560 N |
Stroke | 195 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 279 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 24 mm |
Number of Teeth | 83 |
Surface | Coated |
Belts | with rounded tooth profile |
Function | Timing Belt |
Weight | 0.084 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 103 mm |
Material | Thermoplastic polyester elastomer |
Placement on Vehicle | transmission sided, Front Axle Left |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 69 mm |
Weight | 0.205 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184961)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.402 kg |
Placement on Vehicle | Rear Axle |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Length | 122.8 mm |
Width | 53.5 mm |
Thickness/Strength 1 | 17.5 mm |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Front |
Weight | 0.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 27.1 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Internal Thread Size | M30 x 1,5 RHT |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle |
Length | 125 mm |
Thread Type | with right-hand thread |
Extra Description | ProKit |
Weight | 1.6 kg |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose, crankcase ventilation |
Height | 45 mm |
Width | 110 mm |
for OE number | 11 15 7 533 341 |
Inner diameter 2 | 13 mm |
Inner diameter 1 | 16 mm |
Weight | 0.041 kg |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Additional Information 2 | with quick couplers |
Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right, Centre |
Material | Rubber/Metal |
Outer diameter | 45.4 mm |
Thickness | 48 mm |
Inner diameter | 14.2 mm |
Weight | 0.170 kg |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.132 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Function | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.466 kg |
Placement on Vehicle | Front Axle Left |
Length | 354 mm |
Material | Steel |
Outer diameter | 9 mm |
Spanner Size | 17 |
Paired article numbers | 48045 |
Rod/Strut | Coupling Rod |
Thread Length | 21.3 mm |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 38 mm |
Outer diameter | 79 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Additional Information 2 | with retaining ring |
Additional Information | with axle nut |
Inner diameter | 43 mm |
Weight | 0.950 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 4 mm |
Placement on Vehicle | Rear Axle |
Inspection Tag | ECE R90 Approved |
Outer diameter | 180 mm |
Width | 25 mm |
Function | Brake Shoe Set, parking brake |
Weight | 1.20 kg |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 57.5 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Length | 150.8 mm |
Thickness/Strength 1 | 18.3 mm |
Type | Brake Pad Set, disc brake |
Weight | 2.0 kg |
Additional Information 2 | with bolts/screws |
Replaces | 116013 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Paired article numbers | 39472 |
Placement on Vehicle | Rear Axle Left |
External Thread Size | M10 x 1,25 |
Weight | 0.26 kg |
Rod/Strut | Coupling Rod |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Hole Spacing | 85 mm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Weight | 0.028 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Rear Axle |
Weight | 0.11 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (103739)
Important compatibility info
Weight | 0.045 kg |
Function | Coolant Pipe |
Cooling Hose | from oil cooler to engine block |
Thickness | 60 mm |
Width | 50 mm |
Length | 181 mm |
Extra Description | febi Plus |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 11.8 mm |
Weight | 1.98 kg |
Placement on Vehicle | Rear Axle |
Length | 361 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Outer diameter | 113 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023