Important compatibility info
Weight | 0.246 kg |
Placement on Vehicle | both sides |
Length | 505 mm |
Housing Diameter | 19 mm |
Eject Force | 770 N |
Stroke | 157 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 96 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 88 mm |
Weight | 0.158 kg |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (194039)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.437 kg |
Diameter | 400 mm. 430 mm |
Type | Repair Kit, clutch release bearing |
Function | Repair Kit, clutch release bearing |
Replaces | 44160 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.030 kg |
Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
Outer diameter | 70 mm |
Thickness | 8 mm |
Inner diameter | 55 mm |
Function | Shaft Seal, injector pump |
Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.84 kg |
Placement on Vehicle | Front Axle |
Length | 334 mm |
Outer diameter | 157 mm |
Function | Suspension Spring |
Wire Diameter | 12.5 mm |
Number of Coils | 4.4 |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 700 mm |
Housing Diameter | 22 mm |
Mounting points diameter | 18 mm |
Eject Force | 660 N |
Stroke | 305 mm |
Housing length | 373.5 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.556 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, oil sump |
Weight | 0.030 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 127 mm |
Weight | 0.411 kg |
Type | Protection Lid, wheel hub |
Height | 50 mm |
Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Placement on Vehicle | both sides |
Length | 750 mm |
Housing Diameter | 18 mm |
Eject Force | 300 N |
Stroke | 325 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, bonnet |
Function | Gas Spring, bonnet |
Housing length | 407.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws, with sensor |
Function | Coolant Flange |
Type | Coolant Flange |
Weight | 0.166 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.085 kg |
Resistance | 1300 Ohm |
Cable Length | 920 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 1015 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.290 kg |
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle |
Length | 128.7 mm |
Width | 46.4 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.225 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 110 mm |
Material | Thermoplast |
Inner diameter 1 | 31 mm |
Inner diameter 2 | 81 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173246)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.016 kg |
Function | Bolt, release fork |
Type | Bolt, release fork |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
- 2x Febi Bearing, clutch lever (35984)
Important compatibility info
Opening Temperature | 82 °C |
Function | Thermostat, coolant |
Weight | 0.178 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11848)
- 1x Febi Seal, thermostat (11834)
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 20.3 mm |
Weight | 0.490 kg |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Weight | 0.060 kg |
Cable Length | 1135 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.275 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 1370 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 180225 |
Type | Brake Hose |
Weight | 0.232 kg |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Length | 535 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.470 kg |
Placement on Vehicle | Front |
Length | 157 mm |
Width | 88 mm |
Thickness | 60 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.673 kg |
Function | Repair Kit, reversing lever |
Type | Repair Kit, reversing lever |
for OE number | 211 498 171 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Steering Shaft (01539)
- 2x Febi Bush, steering arm shaft (01641)
- 1x Febi Seal, steering arm (01637)
- 1x Febi Seal, steering arm (01638)
- 1x Febi Repair Kit, reversing lever (01643)
- 1x Febi Washer (01642)
- 1x Febi Repair Kit, reversing lever (01644)
- 1x Febi Repair Kit, reversing lever (01645)
- 1x Febi Spring Washer (01646)
- 1x Febi Repair Kit, reversing lever (01635)
- 1x Febi Screw (01634)
Important compatibility info
Weight | 1.165 kg |
Internal Thread Size | M32 x 1,5 |
Height | 263 mm |
Outer diameter | 107 mm |
Inner diameter | 93 mm |
Filter type | Spin-on Filter |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Length | 57 mm |
Spanner Size | 19 |
Opening Pressure | 14.3 bar |
Function | Pressure Relief Valve |
External Thread Size | M16 x 1,5 |
Type | Pressure Relief Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 0.92 kg |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 211 mm |
Paired article numbers | 43547 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 755 951 S1 |
Weight | 0.7 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 65 mm |
Inner diameter | 55 mm |
Function | Radiator Hose |
Extra Description | ProKit |
Additional Information 2 | with clamps |
Type | Radiator Hose |
Hose Length | 574 mm |
Wall Thickness | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101070)
- 2x Febi Hose Clamp (48355)
Important compatibility info
Weight | 0.361 kg |
Placement on Vehicle | both sides |
Length | 600 mm |
Stroke | 250 mm |
Eject Force | 330 N |
Housing Diameter | 19 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Housing length | 323.5 mm |
Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.213 kg |
Outer diameter | 69 mm |
Thickness | 101 mm |
Inner diameter | 33 mm |
Filter type | Filter Insert |
Type | Oil Filter, manual transmission |
Function | Oil Filter, manual transmission |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Accessory Kit, brake disc |
Function | Accessory Kit, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt |
Number of Ribs | 10 |
Length | 1635 mm |
Weight | 0.227 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Weight | 0.117 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Length | 1240 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.245 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 128 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Weight | 0.560 kg |
Outer diameter | 54 mm. 50 mm |
Material | Rubber/Metal |
Placement on Vehicle | Lower Front Axle, Centre |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without coolant level sensor |
Weight | 0.51 kg |
Material | PP (Polypropylene) |
Colour | White |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 13 04 241 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Placement on Vehicle | Rear Axle |
Length | 110.4 mm |
Width | 37.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 13.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Lock Cylinder, ignition lock |
Type | Lock Cylinder, ignition lock |
Weight | 0.174 kg |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.834 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing, with fastening material |
for OE number | 03 44 519 S2 |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08176)
- 1x Febi Rolling Bearing, suspension strut support mount (17180)
- 1x Febi Rubber Buffer, suspension (03099)
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Weight | 0.830 kg |
Placement on Vehicle | Front Axle Right |
Length | 258 mm |
Width | 60 mm |
Thickness | 90 mm |
Spanner Size | 22 |
Paired article numbers | 36585 |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.400 kg |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 82 mm |
Thickness | 110 mm |
Inner diameter | 26 mm |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Weight | 0.501 kg |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 22 140 46R |
Weight | 0.372 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Weight | 0.037 kg |
Type | Finger Follower, engine timing |
Function | Finger Follower, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.503 kg |
Material | Rubber/Metal |
Thickness | 90 mm |
Paired article numbers | 170538 |
Function | Bushing, axle beam |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 106 mm |
Height | 132 mm |
Filter type | In-Line Filter, with filter heating |
Type | Fuel filter |
Pipe Diameter | 10 mm |
Weight | 0.350 kg |
Function | Fuel filter |
Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Rear Axle |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Length | 77 mm |
Type | Bellow Kit, drive shaft |
Weight | 0.273 kg |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36551)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.01 kg |
Type | Locking Clip |
Function | Locking Clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Right |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Weight | 0.5 kg |
Type | Roller Guide, sliding door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Function | Sprocket, crankshaft |
Engine Management | Timing Chain |
Number of Teeth | 20 |
Inner diameter | 36 mm |
Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.262 kg |
Placement on Vehicle | both sides |
Length | 547 mm |
Housing Diameter | 18 mm |
Eject Force | 475 N |
Stroke | 209 mm |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 296 mm |
Type | Gas Spring, boot/cargo area |
Replaces | 27780 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 16.7 mm |
Width | 55.9 mm |
Placement on Vehicle | Front Axle |
Length | 142.6 mm |
Weight | 1.532 kg |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information | with retaining spring holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.149 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 54 |
Function | Chain, oil pump drive |
Timing Chain Size | G53HP, G53HR |
Additional Information 2 | Requires special tools for mounting |
Type | Chain, oil pump drive |
Replaces | 33893 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023