Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.458 kg |
| Length | 253 mm |
| Height | 40 mm |
| Width | 134 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Paired article numbers | 171537 |
| Weight | 0.383 kg |
| Placement on Vehicle | Front Axle Right |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.63
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right, Upper |
| for OE number | 1806.74 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.850 kg |
| Type | Mounting, engine |
| Paired article numbers | 185108 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Tensile Cord Material | Aramid |
| Length | 1090 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.126 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.085 kg |
| Resistance | 1300 Ohm |
| Cable Length | 920 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 1015 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Number of Ribs | 10 |
| Length | 1635 mm |
| Weight | 0.227 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Weight | 0.178 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (11848)
- 1x Febi Seal, thermostat (11834)
£21.62
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1073 mm |
| Alternator type | for starter generator |
| Weight | 0.131 kg |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Alternator type | for starter generator |
| Length | 1061 mm |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Weight | 0.095 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.092 kg |
| Length | 57 mm |
| Spanner Size | 19 |
| Opening Pressure | 14.3 bar |
| Function | Pressure Relief Valve |
| External Thread Size | M16 x 1,5 |
| Type | Pressure Relief Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Paired article numbers | 180225 |
| Type | Brake Hose |
| Weight | 0.232 kg |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Length | 535 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.050 kg |
| Voltage | 28.5 V |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.31 kg |
| Height | 109 mm |
| Outer diameter | 97 mm |
| Filter type | In-Line Filter |
| Type | Fuel filter |
| Function | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Function | Cable Pull, clutch control |
| Outer Length | 971 mm |
| Inner Length | 602 mm |
| Weight | 0.262 kg |
| Type | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.235 kg |
| Length | 479 mm |
| Housing Diameter | 18 mm |
| Eject Force | 340 N |
| Stroke | 179 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 266 mm |
| Placement on Vehicle | both sides |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.030 kg |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 70 mm |
| Thickness | 8 mm |
| Inner diameter | 55 mm |
| Function | Shaft Seal, injector pump |
| Type | Shaft Seal, injector pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Left |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Paired article numbers | 174235 |
| Weight | 0.364 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Weight | 0.470 kg |
| Placement on Vehicle | Front |
| Length | 157 mm |
| Width | 88 mm |
| Thickness | 60 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| Outer diameter | 127 mm |
| Weight | 0.411 kg |
| Type | Protection Lid, wheel hub |
| Height | 50 mm |
| Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.62
Important compatibility info
| for OE number | 1 755 951 S1 |
| Weight | 0.7 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 65 mm |
| Inner diameter | 55 mm |
| Function | Radiator Hose |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Hose Length | 574 mm |
| Wall Thickness | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (101070)
- 2x Febi Hose Clamp (48355)
£21.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023