Important compatibility info
Weight | 1.130 kg |
Placement on Vehicle | Rear Axle |
Length | 110.5 mm |
Width | 47.8 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Weight | 0.183 kg |
Type | Wheel Brake Cylinder |
Function | Wheel Brake Cylinder |
Piston Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.106 kg |
Length | 253 mm |
Additional Information 2 | with seal ring |
Spanner Size | 27 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 24 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.9 mm. 16.5 mm |
Additional Information | with retaining spring holder |
Type | Brake Pad Set, disc brake |
Weight | 1.043 kg |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle |
Wear Warning Contact | with acoustic wear warning |
Length | 113.4 mm |
Width | 47.6 mm |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.188 kg |
Type | Brake Hose |
Internal Thread Size | M10 x 1 |
Function | Brake Hose |
Paired article numbers | 180233 |
Placement on Vehicle | Front Axle Left |
Length | 716 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Fill Medium | Brake Fluid |
Weight | 0.578 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 44.5 mm |
Inner diameter | 12 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Weight | 0.53 kg |
Extra Description | ProKit |
Additional Information 2 | with ball bearing, with fastening material |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (28221)
- 1x Febi Nut (38060)
- 1x Febi Nut (38059)
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle, inner |
Inner diameter | 45 mm |
Function | Mounting, stabiliser bar |
Weight | 0.61 kg |
Outer diameter | 80 mm. 92 mm |
Length | 95 mm |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1822 mm |
Number of Ribs | 6 |
Weight | 0.167 kg |
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Weight | 0.60 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 1660 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3/4" - 16 UNF |
Inner diameter | 62 mm. 71 mm |
Additional Information 2 | without integrated oil separator, with seal ring |
Function | Air Dryer Cartridge, compressed-air system |
Outer diameter | 76 mm |
Weight | 0.784 kg |
Type | Air Dryer Cartridge, compressed-air system |
Height | 123 mm |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.055 kg |
Cable Length | 715 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Type | Bellow Kit, drive shaft |
Weight | 0.177 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 31 mm |
Material | Thermoplast |
Length | 115 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175636)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.929 kg |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.6 kg |
Placement on Vehicle | Front Axle |
Length | 132.8 mm |
Width | 58.4 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, Left |
Weight | 0.364 kg |
Length | 384 mm |
Height | 103 mm |
Width | 298 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.175 kg |
Opening Temperature | 86 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
for OE number | 8149186 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, thermostat (11834)
- 1x Febi Thermostat, coolant (11849)
Important compatibility info
Weight | 0.304 kg |
Housing length | 271.5 mm |
Mounting points diameter | 18 mm |
Placement on Vehicle | both sides |
Length | 500 mm |
Eject Force | 530 N |
Stroke | 193 mm |
Housing Diameter | 19 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.364 kg |
Paired article numbers | 174233 |
Placement on Vehicle | Rear Axle Right |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Cable Length | 1580 mm |
Type | Sensor, wheel speed |
Weight | 0.132 kg |
Number of Connectors / Ports | 2 |
Paired article numbers | 172369 |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023