Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.055 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 109720 |
| Number of Connectors / Ports | 2 |
| Cable Length | 780 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.92 kg |
| Placement on Vehicle | Rear Axle, Wheel Side |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 63 mm |
| Inner diameter 1 | 25 mm |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Molybdenum Grease (08414)
£21.14
Important compatibility info
| Weight | 0.090 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 96318238 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 270 mm |
| Function | Inner Tie Rod |
| Weight | 0.410 kg |
| External Thread Size | M14 x 2, M14 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with counter nut |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 1.126 kg |
| Length | 200 mm |
| Width | 150 mm |
| Material | Rubber/Metal |
| Outer diameter | 77 mm. 87 mm |
| Inner diameter | 12 mm |
| Paired article numbers | 12069 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 74 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 253 mm |
| Outer diameter | 104 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11 mm |
| Weight | 1.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Height | 69 mm |
| Filter type | Filter Insert |
| Type | Fuel filter |
| Weight | 0.163 kg |
| Function | Fuel filter |
| Inner diameter | 49 mm |
| Seal Diameter | 130.5 mm |
| Additional Information 2 | with seal ring |
| Outer diameter | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Inner diameter | 32 mm |
| Thickness | 160 mm |
| Weight | 0.37 kg |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.09 kg |
| Function | Exhaust Valve |
| Valve head diameter | 39 mm |
| Valve stem diameter | 9 mm |
| Length | 115.8 mm |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1772 mm |
| Weight | 0.240 kg |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Left |
| Outer diameter | 64 mm |
| Weight | 0.421 kg |
| Inner diameter | 54 mm |
| Function | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 0.131 kg |
| Width | 23 mm |
| Number of Teeth | 150 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 108.9 mm |
| Width | 42 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 0.91 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.61 kg |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing |
| Inner diameter | 42 mm |
| Outer diameter | 75 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.391 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Number of Ribs | 9 |
| Function | V-Ribbed Belt |
| Length | 1936 mm |
| Weight | 0.240 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Weight | 0.76 kg |
| Width | 20 mm |
| Outer diameter | 47 mm |
| Inner diameter | 18 mm. 12 mm |
| Paired article numbers | 36821 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.14
Important compatibility info
| Length | 167 mm |
| Height | 28 mm |
| Width | 138 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.316 kg |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.13
Important compatibility info
| Steering arm type | for control arm |
| External Thread Size | M14 x 1,5 |
| Weight | 0.842 kg |
| Type | Ball Joint |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Front Axle Right, outer |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Pipe Diameter | 51 mm |
| Thread Type | with left-hand thread |
| Cone Size | 25 mm |
| External Thread Size | M20 x 1,5, M30 x 1,5 LHT |
| Weight | 1.165 kg |
| Placement on Vehicle | Front Axle |
| Length | 117 mm |
| Extra Description | ProKit |
| Additional Information | with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter | 60 mm |
| Colour | Red |
| Function | Radiator Hose |
| Weight | 0.12 kg |
| Outer diameter 2 | 73 mm |
| Outer diameter 1 | 62 mm |
| Extra Description | ProKit |
| Additional Information 2 | with clamps |
| Type | Radiator Hose |
| Hose Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Radiator Hose (35897)
- 2x Febi Hose Clamp (48356)
£21.12
Important compatibility info
| Weight | 1.506 kg |
| Placement on Vehicle | Rear Axle |
| Length | 113.7 mm |
| Width | 62.8 mm |
| Brake System | TRW |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Weight | 1.49 kg |
| Placement on Vehicle | Rear Axle |
| Width | 29 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 52 mm |
| Function | Bushing, stabiliser coupling rod |
| Type | Bushing, stabiliser coupling rod |
| Inner diameter | 16.5 mm |
| Outer diameter | 50 mm |
| Material | Rubber/Metal |
| Weight | 0.317 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.12
Important compatibility info
| Weight | 0.732 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Length | 165 mm. 139 mm |
| Thickness | 101 mm |
| Spanner Size | 16 |
| Paired article numbers | 44281 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (44280)
- 1x Febi Nut (38356)
£21.11
Important compatibility info
| Type | Bushing, leaf spring |
| Inner diameter | 24.4 mm |
| Weight | 0.794 kg |
| Function | Bushing, leaf spring |
| Length | 88 mm |
| Material | Rubber/Metal |
| Outer diameter | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
Important compatibility info
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.120 kg |
| Length | 3520 mm |
| Outer diameter | 6 mm |
| Spanner Size | 14 |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hose Line, driver cab tilting device (26411)
- 2x Febi Nut (104612)
- 2x Febi Hose Line, driver cab tilting device (105733)
£21.11
Important compatibility info
| Weight | 0.31 kg |
| Width | 26 mm |
| Outer diameter | 53 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Replaces | 24751 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 6 |
| Length | 1194 mm |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Weight | 0.113 kg |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
Important compatibility info
| Weight | 0.251 kg |
| Placement on Vehicle | both sides |
| Length | 473 mm |
| Housing Diameter | 18 mm |
| Eject Force | 510 N |
| Stroke | 162 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023