Important compatibility info
Material | Rubber |
Function | Gasket, automatic transmission oil sump |
Weight | 0.095 kg |
Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, outer |
Length | 425 mm |
Additional Information 2 | with seal ring, with banjo bolt |
Weight | 0.150 kg |
Type | Brake Hose |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.92 kg |
Placement on Vehicle | Rear Axle, Wheel Side |
Additional Information | with grease |
Additional Information 2 | with clamps |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 63 mm |
Inner diameter 1 | 25 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 76.7 mm |
Outer diameter | 139 mm. 43 mm |
Additional Information 2 | with wheel studs, without wheel bearing |
Bolt Hole Circle Diameter | 114 mm |
Weight | 2.04 kg |
Type | Wheel Hub |
Function | Wheel Hub |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.536 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear, Rear Axle Right |
Steering arm type | Control Arm |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (06859)
Important compatibility info
External Thread Size | M18 x 1,5 |
Weight | 0.7 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 22.2 mm |
Type | Ball Joint |
Function | Ball Joint |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 89 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Cable Length | 211 mm |
Additional Information 2 | with screw |
Length | 275 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Weight | 0.028 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.262 kg |
Placement on Vehicle | Rear Axle |
Length | 112 mm |
Width | 73 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 96 mm |
Thickness | 98 mm |
Inner diameter | 22 mm |
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Material | Rubber |
Weight | 0.512 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 1705 mm |
Weight | 0.398 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.178 kg |
Outer diameter | 66 mm |
Thickness | 101 mm |
Inner diameter | 15 mm |
Function | Urea Filter |
Internal Thread Size | M15 x 3 |
Type | Urea Filter |
Additional Information | with gasket/seal, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Weight | 0.251 kg |
Type | Radiator Hose |
Additional Information | with quick coupling |
Hose Length | 585 mm |
Additional Information 2 | with clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Alternator type | for starter generator |
Type | V-Ribbed Belt |
Weight | 0.085 kg |
Number of Ribs | 5 |
Function | V-Ribbed Belt |
Tensile Cord Material | Aramid |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1166 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.272 kg |
Length | 2000 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5, M28 x 1,5 |
Weight | 1.233 kg |
Replaces | 26216 |
Length | 115 mm |
Outer diameter | 56 mm |
Thread Type | with right-hand thread |
Cone Size | 26 mm |
Pipe Diameter | 56 mm |
Function | Angled Ball Joint, steering push rod |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear |
Length | 100 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 0.45 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Placement on Vehicle | Lower Left |
Material | Rubber, Rubber with fabric lining |
Outer diameter | 24 mm. 43 mm. 50 mm |
Inner diameter | 18 mm. 34 mm. 40 mm |
Colour | Black |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.094 kg |
Function | V-Ribbed Belt |
Alternator type | for starter generator |
Number of Ribs | 6 |
Length | 994 mm |
Tensile Cord Material | Aramid |
Type | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Ribbed Belt |
Weight | 0.084 kg |
Alternator type | for starter generator |
Number of Ribs | 6 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Aramid |
Function | V-Ribbed Belt |
Length | 922 mm |
Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023