Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 104173 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 1365 mm |
| Function | Sensor, wheel speed |
| Weight | 0.140 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 107 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 12.9 |
| Weight | 0.81 kg |
| Number of screws | 14 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 95 mm |
| Type | Cylinder Head Bolt Set |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04083)
£19.26
Important compatibility info
| Type | Fuel filter |
| Filter type | In-Line Filter, with water separator |
| Length | 187 mm |
| Outer diameter | 80 mm |
| Weight | 0.457 kg |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 84 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Ball Joint |
| Weight | 0.43 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.2 mm |
| External Thread Size | M14 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Weight | 0.42 kg |
| Extra Description | ProKit |
| Height | 135 mm |
| Width | 108 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 40 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Additional Information | with fastening/mounting material |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Cable Length | 584 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 195 mm |
| Spanner Size | 15 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Paired article numbers | 109581 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.103 kg |
| Housing length | 150 mm |
| Mounting points diameter | 8.3 mm |
| Placement on Vehicle | both sides |
| Length | 272 mm |
| Eject Force | 300 N |
| Stroke | 90 mm |
| Housing Diameter | 16 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.33 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 111 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 58 mm |
| Additional Information 2 | without ball bearing |
| Inner diameter | 10 mm. 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Type | Switch, tailgate release |
| Number of Connectors / Ports | 2 |
| Function | Switch, tailgate release |
| Extra Description | febi Plus |
| Cable Length | 153 mm |
| Weight | 0.010 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.076 kg |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 47 mm |
| Spanner Size | 22 |
| Opening Pressure | 4.0 bar |
| Function | Overflow Valve |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Wear Warning Contact | excl. wear warning contact |
| Weight | 1.970 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.3 mm. 155.2 mm |
| Width | 67.2 mm. 62.5 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Manufacturer | FORD MAZDA VOLVO |
| Replaces | 16871 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.041 kg |
| Cable Length | 445 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106716 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.325 kg |
| Placement on Vehicle | Right |
| Length | 570 mm |
| Paired article numbers | 24737 |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 254 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 326.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.084 kg |
| Additional Information 2 | with seal ring |
| Outer diameter | 92.3 mm |
| Height | 51.8 mm |
| Function | Lid, urea filter housing |
| Type | Lid, urea filter housing |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Weight | 0.69 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 72 mm |
| Inner diameter | 40 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| for OE number | 1H0 498 625 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, brake disc (04511)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Nut (01688)
- 1x Febi Nut (11435)
- 1x Febi Circlip (05299)
£19.25
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Weight | 0.03 kg |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Weight | 0.070 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 30 mm |
| Inner diameter 2 | 84 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101941)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Axle Bolt, drive shaft (40617)
£19.25
Important compatibility info
| Bolt Head/Nut Design | Male Hex |
| Height | 19 mm |
| Spanner Size | 74 |
| Surface | Phosphatized |
| Internal Thread Size | M60 x 2 |
| Weight | 0.37 kg |
| Type | Nut, kingpin |
| Function | Nut, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Weight | 0.140 kg |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
| Additional Information | with gasket/seal |
| Width | 135 mm |
| Length | 169.5 mm |
| Function | Hydraulic Filter, automatic transmission |
| Transmission Type | 8-Speed Dual-Clutch Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Width | 182 mm |
| Length | 259 mm |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
| Height | 45 mm |
| Weight | 0.193 kg |
| Filter type | Activated Carbon Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.25
Important compatibility info
| Weight | 0.842 kg |
| Placement on Vehicle | Rear Axle |
| Length | 101.3 mm |
| Width | 44.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 0.900 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 12371-28021 |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Function | Suspension Strut Support Mount |
| Inner diameter | 8.2 mm |
| Weight | 0.419 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.260 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.204 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (36351)
£19.24
Important compatibility info
| Weight | 0.097 kg |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| for OE number | 123 462 04 79 |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Length | 653 mm |
| Additional Information | with holder |
| Paired article numbers | 182922 |
| Type | Brake Hose |
| Weight | 0.275 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Type | Brake Hose |
| Function | Brake Hose |
| Placement on Vehicle | Front Axle Right |
| Length | 653 mm |
| Paired article numbers | 182921 |
| Weight | 0.275 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Weight | 0.206 kg |
| Hose Length | 468 mm |
| Additional Information 2 | with quick couplers |
| Placement on Vehicle | Lower Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from radiator to water pipe |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Weight | 1.081 kg |
| Placement on Vehicle | Rear Axle |
| Length | 118.5 mm |
| Width | 46.4 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Cone Size | 21 mm |
| Mounting points diameter | 10.2 mm |
| Weight | 0.660 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 0.6 kg |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09020)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
£19.24
Important compatibility info
| Weight | 0.700 kg |
| Placement on Vehicle | Rear Axle |
| Length | 105.9 mm. 85.5 mm |
| Width | 35.5 mm. 40 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.24
Important compatibility info
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Weight | 0.809 kg |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Weight | 0.320 kg |
| Height | 424 mm |
| Outer diameter | 183 mm |
| Inner diameter | 141 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
| Weight | 0.836 kg |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.250 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (27122)
- 2x Febi Protective Cap/Bellow, shock absorber (26941)
£19.23
Important compatibility info
| Weight | 0.186 kg |
| Placement on Vehicle | Front Axle |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.23
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, engine |
| Weight | 0.582 kg |
| Type | Mounting, engine |
| for OE number | 1K0 199 855 BD |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.078 kg |
| Number of Ribs | 5 |
| Length | 628 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 36 |
| Internal Teeth, wheel side | 30 |
| Outer diameter 1 | 84 mm |
| Outer diameter 2 | 52 mm |
| Function | Joint Kit, drive shaft |
| Weight | 2.06 kg |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.036 kg |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.078 kg |
| Function | Finger Follower, engine timing |
| Type | Finger Follower, engine timing |
| Placement on Vehicle | Intake Side, Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Weight | 0.700 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Length | 72.5 mm. 90 mm |
| Outer diameter | 70 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Function | Oil Hose |
| Extra Description | febi Plus |
| Length | 343 mm |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.21 kg |
| Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Length | 1120 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.102 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.22
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 597 mm |
| Housing Diameter | 19 mm |
| Eject Force | 515 N |
| Stroke | 204 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 356.5 mm |
| Weight | 0.361 kg |
| Type | Gas Spring, boot/cargo area |
| Replaces | 25313; 27887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 53 mm. 32 mm |
| Thickness | 80 mm |
| Inner diameter | 15 mm |
| Function | Mounting, control/trailing arm |
| Weight | 0.247 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023