Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Inner Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M14 x 1,5 |
| Type | Inner Tie Rod |
| Weight | 0.7 kg |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.28
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 78 mm |
| Thickness | 70 mm |
| Inner diameter | 47 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.525 kg |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.28
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 88 °C |
| Weight | 0.110 kg |
| Additional Information 2 | with seal ring |
| Outer diameter | 54 mm |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.28
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Type | Actuator, fuel filler flap |
| Weight | 0.085 kg |
| Function | Actuator, fuel filler flap |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.28
Important compatibility info
| Weight | 1.740 kg |
| Placement on Vehicle | Front Axle |
| Length | 142.2 mm |
| Width | 53.9 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.27
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.27
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 571 mm |
| Housing Diameter | 19 mm |
| Eject Force | 520 N |
| Stroke | 209 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 318.5 mm |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.343 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.27
Important compatibility info
| Weight | 0.9 kg |
| Thickness/Strength 1 | 16.5 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Width | 50 mm |
| Length | 90 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 116103 |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.1 kg |
| Opening Temperature | 84 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 605 mm |
| Function | Brake Hose |
| Spanner Size | 11 |
| Type | Brake Hose |
| Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Weight | 1.012 kg |
| Cone Size | 19.7 mm |
| Mounting points diameter | 10.5 mm |
| Function | Ball Joint |
| External Thread Size | M18 x 1,5 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
| Weight | 0.06 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.250 kg |
| Length | 1896 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
| Weight | 0.053 kg |
| Type | Gasket, cylinder head cover |
| for OE number | 13270-3HD0A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.16 kg |
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Length | 415 mm |
| Width | 254 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.41 kg |
| Extra Description | ProKit |
| Height | 135 mm |
| Width | 115 mm |
| Rated Power | 27 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 36 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Housing material | Aluminium |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.025 kg |
| Colour | Grey |
| Number of Connectors / Ports | 3 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Mounting points diameter | 12.1 mm |
| Function | Ball Joint |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 17.5 mm |
| Weight | 0.87 kg |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Left |
| Function | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.88 kg |
| Length | 167 mm |
| Width | 147 mm |
| Material | Rubber/Metal |
| Outer diameter | 88 mm. 109 mm |
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 50 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.177 kg |
| Thickness | 17 mm |
| Colour | Black |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Outer diameter | 99.5 mm |
| Inner diameter | 65.5 mm |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Weight | 0.093 kg |
| Material | NBR (nitrile butadiene rubber) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (108337)
- 4x Febi Seal Ring, spark plug shaft (106402)
£19.26
Important compatibility info
| Weight | 0.103 kg |
| Housing length | 150 mm |
| Mounting points diameter | 8.3 mm |
| Placement on Vehicle | both sides |
| Length | 272 mm |
| Eject Force | 300 N |
| Stroke | 90 mm |
| Housing Diameter | 16 mm |
| Piston conrod diameter | 6 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 1435 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Weight | 0.220 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.06 kg |
| Length | 55 mm |
| Voltage | 12 V |
| Spanner Size | 22 |
| Switch Point | 104 °C. 98 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M14 x 1,5 |
| Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.041 kg |
| Cable Length | 445 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106716 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 87 mm |
| Inner diameter 1 | 28 mm |
| Material | Thermoplast |
| Length | 117 mm |
| Type | Bellow Kit, drive shaft |
| Replaces | 22981 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (22979)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38758)
- 1x Febi Nut, kingpin (22953)
- 2x Febi Molybdenum Grease (02582)
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Left |
| Length | 195 mm |
| Additional Information | with lock nut |
| Spanner Size | 15 |
| Paired article numbers | 109582 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.39 kg |
| Pipe Diameter | 14 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 204 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Material | Plastic |
| Outer diameter | 78 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.19 kg |
| Width of castor bearing surface | 25 mm |
| Additional Information 2 | with screw |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| for OE number | 5751.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.685 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 195 mm |
| Spanner Size | 15 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| Paired article numbers | 109581 |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Wear Warning Contact | excl. wear warning contact |
| Weight | 1.970 kg |
| Placement on Vehicle | Front Axle |
| Length | 156.3 mm. 155.2 mm |
| Width | 67.2 mm. 62.5 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.8 mm |
| Type | Brake Pad Set, disc brake |
| Manufacturer | FORD MAZDA VOLVO |
| Replaces | 16871 |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.195 kg |
| Width | 30 mm |
| Material | Plastic |
| Outer diameter | 60 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.500 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 160 mm |
| Additional Information | with counter nut |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| External Thread Size | M16 x 1,5 |
| Replaces | 39501 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.950 kg |
| Placement on Vehicle | Rear Axle |
| Length | 115.3 mm |
| Width | 45.7 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Mounting and Bolting Kit, control/trailing arm |
| Steering arm type | Control Arm |
| for OE number | 191 407 153 S2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.739 kg |
| Type | Mounting and Bolting Kit, control/trailing arm |
| Additional Information 2 | without ball joint, with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07856)
- 1x Febi Mounting, control/trailing arm (07847)
- 1x Febi Link/Coupling Rod, stabiliser bar (07863)
- 1x Febi Securing Plate, ball joint (07862)
- 3x Febi Clamping Bolt, ball joint (07866)
- 1x Febi Clamping Bolt, ball joint (03938)
- 1x Febi Sleeve, control arm mounting (03544)
£19.26
Important compatibility info
| Paired article numbers | 23323 |
| Colour | Black |
| Cone Size | 15 mm |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.780 kg |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25, M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Cable Length | 584 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 107 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 12.9 |
| Weight | 0.81 kg |
| Number of screws | 14 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 95 mm |
| Type | Cylinder Head Bolt Set |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04083)
£19.26
Important compatibility info
| Weight | 0.076 kg |
| External Thread Size | M16 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 47 mm |
| Spanner Size | 22 |
| Opening Pressure | 4.0 bar |
| Function | Overflow Valve |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 1826 mm |
| Weight | 0.279 kg |
| Number of Ribs | 9 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Length | 225 mm |
| Paired article numbers | 21494 |
| Quality/ Grade | 10 |
| Weight | 0.640 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 54 mm |
| Weight | 0.197 kg |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Piping to turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 465 mm |
| Housing Diameter | 18 mm |
| Eject Force | 360 N |
| Stroke | 165 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 257.5 mm |
| Weight | 0.250 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.17 kg |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12485)
- 2x Febi Protective Cap/Bellow, shock absorber (12482)
£19.26
Important compatibility info
| Weight | 0.257 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 129 mm |
| Material | Thermoplast |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 103 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101863)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45646)
- 1x Febi High Temperature Lubricant (03630)
£19.26
Important compatibility info
| Weight | 0.401 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09496)
- 1x Febi Rolling Bearing, suspension strut support mount (12448)
£19.26
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 35 mm |
| Outer diameter 1 | 45 mm |
| Width 1 | 15.5 mm |
| Outer diameter 2 | 62 mm |
| Width 2 | 18 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.405 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (14496)
- 1x Febi Split Pin (02877)
£19.26
Important compatibility info
| Weight | 0.325 kg |
| Placement on Vehicle | Right |
| Length | 570 mm |
| Paired article numbers | 24737 |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 254 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 326.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
Important compatibility info
| Weight | 0.07 kg |
| Material | Metal |
| Type | Gasket, oil sump |
| Function | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023