Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.50
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.83 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.45
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Weight | 10.33 kg |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.4 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Clutch, radiator fan |
| Weight | 1.157 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 2.753 kg |
| for OE number | 2 374 003 |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 4.730 kg |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Additional Information 2 | with bolts/screws |
| Additional Information | with clamping elements |
| Units / Pulleys | incl. deflection pulley |
| Length 1 | 1342 mm |
| Length 2 | 1526 mm |
| Number of ribs 2 | 8 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs 1 | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (34350)
- 1x Febi V-Ribbed Belt (40707)
- 2x Febi Belt Tensioner, v-ribbed belt (106501)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (38983)
£136.36
Important compatibility info
| Weight | 1.6 kg |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Number of Chain Links | 142 |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Weight | 0.290 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Additional Information 2 | with gear |
| Weight | 1.822 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Number of Teeth | 41 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 86.0 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.478 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 804 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 0.284 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.748 kg |
| Bore Diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Length | 667 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.35
Important compatibility info
| Number of Connectors / Ports | 6 |
| Ignition Coil | 4 Spark |
| Type | Ignition Coil |
| Function | Ignition Coil |
| Weight | 1.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.32
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 197 mm. 258 mm |
| Thickness | 213 mm. 600 mm |
| Weight | 8.6 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.24
Important compatibility info
| Function | Connecting Rod |
| Type | Connecting Rod |
| Weight | 3.580 kg |
| for OE number | 51.02400.6279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.19
Important compatibility info
| Outer diameter | 396 mm |
| Material | Steel |
| Type | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Weight | 20.8 kg |
| Capacity | 100 l |
| Length | 915 mm |
| Number of Connectors / Ports | 4 |
| Operating Pressure | 10 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.18
Important compatibility info
| Weight | 0.29 kg |
| Length | 105 mm |
| Outer diameter | 75 mm |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.17
Important compatibility info
| Weight | 5.6 kg |
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 30 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Max. Length | 723 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Min. Length | 450 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle, 2nd rear axle, non-steered trailing axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| External Thread Size | M14 x 1,5 |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 4.3 kg |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 753 mm |
| Min. Length | 443 mm |
| Pipe Diameter | 63 mm. 55 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 14 mm |
| Mounting points diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023