Important compatibility info
Inner diameter 1 | 26 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 2 | 88 mm |
Weight | 0.085 kg |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (178810)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.566 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 43 mm |
Outer diameter | 55 mm |
Inner diameter | 25 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (21843)
- 1x Febi Nut, kingpin (19893)
Important compatibility info
Weight | 0.975 kg |
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 01147 |
Type | Tie Rod |
Function | Tie Rod |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (03583)
Important compatibility info
Function | Gasket, oil sump |
Weight | 0.134 kg |
Length | 828 mm |
Width | 363 mm |
Thickness | 2 mm |
Mounting points diameter | 12 mm |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.108 kg |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Function | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 24 mm |
Function | Ball Joint |
Mounting points diameter | 12.5 mm |
Weight | 0.840 kg |
External Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.188 kg |
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Height | 41 mm |
Width | 288 mm |
Length | 356 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.225 kg |
Placement on Vehicle | Rear Axle, Wheel Side |
Length | 117 mm |
Material | Thermoplast |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 80 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101861)
- 1x Febi Clamping Clip (03597)
- 1x Febi Clamping Clip (45643)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.7 kg |
Inspection Tag | ECE R90 Approved |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | with acoustic wear warning |
Width | 40.8 mm |
Length | 92.4 mm |
Placement on Vehicle | Rear Axle |
Thickness/Strength 1 | 14.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Connector Shape | D Shape |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Number of Poles | 2 -pin connector |
Function | Expansion Tank, coolant |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Placement on Vehicle | both sides |
Length | 503 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 193 mm |
Housing length | 280 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Wheel Bolt |
Wheel Fastening | Conical Seat F |
Thread Length | 25 mm |
Surface | Chromed |
Spanner Size | 17, 19 |
Length | 51 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.45 kg |
Screw length below head | 25 mm |
Outer diameter | 23.7 mm |
Material | Steel |
Quality/ Grade | 8.8 |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.830 kg |
Height | 172 mm |
Outer diameter | 109 mm |
Filter type | Spin-on Filter |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.136 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 172538 |
Number of Connectors / Ports | 2 |
Cable Length | 1000 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 420 mm |
Housing Diameter | 19 mm |
Eject Force | 600 N |
Stroke | 151 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.260 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 245 mm |
Housing Diameter | 16 mm |
Eject Force | 400 N |
Stroke | 74 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 6 mm |
Function | Gas Spring, bonnet |
Housing length | 137 mm |
Type | Gas Spring, bonnet |
Weight | 0.106 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Weight | 0.550 kg |
Inner diameter | 160 mm |
Material | Steel |
Outer diameter | 179 mm |
Placement on Vehicle | Front Axle |
Number of Teeth, ABS ring | 100 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Function | Radiator Hose |
Weight | 0.95 kg |
Hose Length | 95 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from heat exchanger to heater valve |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Colour | Grey |
Outer diameter | 24 mm. 70 mm |
Material | Steel |
Spanner Size | 30 |
Paired article numbers | 06239 |
External Thread Size | M30 x 1,5 RHT, M20 x 1,5 |
Cone Size | 28.6 mm |
Weight | 1.4 kg |
Thread Type | with right-hand thread |
Thickness | 120 mm |
Length | 120 mm. 87 mm |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Type | Angled Ball Joint, steering push rod / Tie Rod End |
Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Paired article numbers | 194968 |
Weight | 0.59 kg |
Cone Size | 20 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023