Proud to be a UK-based company
Contact us
Important compatibility info
| Inner diameter 2 | 72 mm |
| Joint Type | Tripod Joint |
| Weight | 0.221 kg |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 26 mm |
| Material | NBR (nitrile butadiene rubber) |
| Length | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176426)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Width | 17 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.620 kg |
| Outer diameter | 63 mm |
| Inner diameter | 38 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Wheel Bearing (173925)
£18.75
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Weight | 1.08 kg |
| Cone Size | 19.6 mm |
| Mounting points diameter | 10.5 mm |
| Type | Ball Joint |
| Additional Information 2 | with washers, with bolts/screws |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 46 |
| Function | Chain Kit, oil pump drive |
| Weight | 0.24 kg |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G52H |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33642)
- 1x Febi Chain Tensioner, oil pump drive (33688)
£18.75
Important compatibility info
| Height | 221 mm |
| Outer diameter | 108 mm |
| Filter type | Spin-on Filter, with water separator |
| Function | Fuel filter |
| Internal Thread Size | 1" - 14 UNS |
| Type | Fuel filter |
| Weight | 1.060 kg |
| Additional Information 2 | with seal ring |
| Chemical Properties | Rape Seed oil resistant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | V-Ribbed Belt |
| Additional Information 2 | Requires special tools for mounting |
| Length | 1180 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
| Chemical Properties | Elastic |
| Weight | 0.105 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Width | 83 mm |
| Length | 131 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Thickness | 126 mm |
| Weight | 1.193 kg |
| Type | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Weight | 0.088 kg |
| Inner diameter 2 | 76 mm |
| Inner diameter 1 | 24 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 113 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Joint Type | CV Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (176121)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Function | Gasket, timing case |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Weight | 0.016 kg |
| Type | Gasket, timing case |
| Thickness | 0.7 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 597 mm |
| Housing Diameter | 19 mm |
| Eject Force | 515 N |
| Stroke | 204 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 356.5 mm |
| Weight | 0.361 kg |
| Type | Gas Spring, boot/cargo area |
| Replaces | 25313; 27887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 904 mm |
| Function | Drive Arm, wiper linkage |
| Type | Drive Arm, wiper linkage |
| Weight | 0.610 kg |
| Hole Spacing | 835 mm. 870 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Length | 1102 mm |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Weight | 0.102 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Alternator type | for starter generator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.29 kg |
| Stroke | 256 mm |
| Housing Diameter | 18 mm |
| Eject Force | 370 N |
| Function | Gas Spring, front panel |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 349 mm |
| Placement on Vehicle | Right Front |
| Length | 632 mm |
| Type | Gas Spring, front panel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.195 kg |
| Height | 80 mm |
| Outer diameter | 124 mm |
| Spanner Size | 34 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cover, fuel filter |
| Function | Cover, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Thickness | 62 mm |
| Outer diameter | 128.5 mm |
| Function | Cap, wheel bearing |
| Spanner Size | 115 |
| Weight | 0.470 kg |
| External Thread Size | M115 x 2 |
| Internal Thread Size | M30 x 2 |
| Type | Cap, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.12 kg |
| Placement on Vehicle | Rear Axle Left |
| Length | 687 mm |
| Paired article numbers | 175228 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | Rear Axle, transmission sided |
| Length | 107 mm |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Weight | 0.304 kg |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (36832)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45644)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Length | 1345 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Tensile Cord Material | Aramid |
| Number of Ribs | 6 |
| Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Width | 220 mm |
| Function | Gasket, cylinder head cover |
| Thickness | 3.5 mm |
| Material | ACM (Polyacrylate) |
| Length | 360 mm |
| Weight | 0.02 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Paired article numbers | 175227 |
| Weight | 0.12 kg |
| Length | 687 mm |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Placement on Vehicle | Left |
| Weight | 0.357 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 947 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 735 mm |
| Spanner Size | 11 |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Weight | 0.16 kg |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.280 kg |
| Housing length | 322.5 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18.5 mm. 18 mm |
| Stroke | 245 mm |
| Eject Force | 300 N |
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Repair Kit, tilt pump |
| External Thread Size | M12 x 1, M12 x 1,5 |
| Weight | 0.2 kg |
| Type | Repair Kit, tilt pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Function | Corrugated Pipe, exhaust system |
| Inner diameter | 90 mm |
| Length | 1 m |
| Weight | 2.45 kg |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.75
Important compatibility info
| Weight | 0.170 kg |
| Material | Thermoplast |
| Placement on Vehicle | Wheel Side, Front Axle Right |
| Length | 116 mm |
| Joint Type | CV Joint |
| Inner diameter 2 | 86 mm |
| Paired article numbers | 175143 |
| Inner diameter 1 | 38 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (174812)
- 1x Febi Molybdenum Grease (02582)
£18.75
Important compatibility info
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Width | 126 mm |
| Material | PU (Polyurethane), Plastic |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (108924)
- 2x Febi Rubber Buffer, suspension (103966)
£18.74
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 22 mm |
| Outer diameter 1 | 68 mm |
| Width 1 | 20 mm |
| Outer diameter 2 | 45 mm |
| Width 2 | 17 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Weight | 0.51 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel hub (24994)
- 1x Febi Wheel Bearing (06126)
- 1x Febi Wheel Bearing (05417)
£18.73
Important compatibility info
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Weight | 0.386 kg |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
Important compatibility info
| Length | 665 mm |
| Material | Steel |
| Function | High Pressure Pipe, injection system |
| Weight | 0.204 kg |
| Internal Thread Size | M14 x 1,5 |
| Type | High Pressure Pipe, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023