Important compatibility info
Additional Information 2 | with dryer, with integrated oil separator |
Voltage | 24 V |
Rated Power | 100 W |
Weight | 3.4 kg |
Control Range | 0,9+0,7 bar |
Type | Air Dryer, compressed-air system |
Cut-off Pressure | 12 bar |
Function | Air Dryer, compressed-air system |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 245 mm |
Inner diameter | 140 mm |
Weight | 12.140 kg |
Function | Wheel Hub |
Additional Information 2 | without wheel bearing |
Outer diameter | 290 mm |
Width | 290 mm |
Type | Wheel Hub |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 992 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 14.000 kg |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 60 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Weight | 3.42 kg |
Control Range | 0,7+0,5 bar |
Type | Air Dryer, compressed-air system |
Rated Power | 100 W |
Function | Air Dryer, compressed-air system |
Cut-off Pressure | 8,5 bar |
Additional Information 2 | with dryer, with integrated oil separator |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pulleys | with belt pulley |
Weight | 0.6 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information 2 | switchable water pump, with bolts/screws |
Material | Aluminium |
Seal Material | Rubber |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M24 x 1,5 |
Internal Thread Size | M32 x 1,5 |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable on one side |
Cone Size | 30.2 mm |
Weight | 16.440 kg |
Rod/Strut | Push Rod |
Length | 1217 mm |
Placement on Vehicle | Front Axle |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
Length | 1952 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Weight | 14.4 kg |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Alternator |
Voltage | 24 V |
Weight | 6.98 kg |
Type | Alternator |
Pulleys | without belt pulley |
Alternator Charge Current | 65 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.104 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 148 |
Function | Timing Chain Kit |
Extra Description | Standard Medium Kit |
Type | Timing Chain Kit |
Additional Information | with chain tensioner, with slide rails |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (108078)
- 1x Febi Tensioner, timing chain (108800)
- 1x Febi Guide, timing chain (108801)
- 1x Febi Guide, timing chain (107896)
- 1x Febi Gear/Sprocket, camshaft (108802)
- 1x Febi Sprocket, crankshaft (108803)
- 1x Febi Shaft Seal, crankshaft (107164)
Important compatibility info
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Width | 25 mm |
Surface | Coated |
Number of Teeth | 141 |
Weight | 2.025 kg |
Belts | with rounded tooth profile |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (32556)
- 1x Febi Water Pump, engine cooling (26832)
Important compatibility info
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal |
Material | Aluminium |
Weight | 3.08 kg |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 51.06500.6698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with screw |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 113.85 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 38 |
Weight | 7.058 kg |
Number of mounting bores | 6 |
Number of Teeth, ABS ring | 45 |
Min. Length | 551 mm |
ABS Ring Diameter | 81 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Vacuum Pump, braking system |
Type | Vacuum Pump, braking system |
Weight | 0.740 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension, propshaft |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Weight | 0.817 kg |
Inner diameter | 30 mm |
Additional Information 2 | with rolling bearing |
Additional Information | with fastening/mounting material |
Length | 193 mm |
Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Manual |
Function | Tilt Pump, driver cab |
Pressure side external thread size | M12 x 1,5 |
Suction side external thread size | M12 x 1,5 |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 3 |
Weight | 2.5 kg |
Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.12 kg |
Replaces | 19205; 20047 |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 695 mm |
Min. Length | 425 mm |
Pipe Diameter | 66 mm. 59 mm |
Mounting points diameter | 25 mm |
Piston conrod diameter | 15 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.19 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 472 mm |
Min. Length | 332 mm |
Pipe Diameter | 80 mm. 70 mm |
Mounting points diameter | 24 mm |
Piston conrod diameter | 22 mm |
Function | Shock Absorber |
Replaces | 20056; 20070 |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.9 kg |
Pipe Diameter | 65 mm. 76 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle |
Min. Length | 481 mm |
Max. Length | 794 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.78 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 853 mm |
Min. Length | 515 mm |
Pipe Diameter | 76 mm. 63.5 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.95 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top pin, Bottom Pin |
Max. Length | 591 mm |
Min. Length | 364 mm |
Pipe Diameter | 76 mm. 63.4 mm |
Piston conrod diameter | 16 mm |
Function | Shock Absorber |
External Thread Size | M16 x 1,5 |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023