Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.6 kg |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 6.4 kg |
| Current Strength | 150 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 1 708 322 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Weight | 1.459 kg |
| Inner diameter | 28 mm |
| Outer diameter | 158 mm |
| Width | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.608 kg |
| Function | Throttle body |
| Number of Connectors / Ports | 5 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 72 mm |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 74 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.065 kg |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Weight | 0.995 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Length | 1199 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (184943)
- 1x Febi Belt Tensioner, v-ribbed belt (180827)
£138.30
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 2 kW |
| Weight | 4.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Pulleys | with belt pulley |
| Weight | 5.45 kg |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Function | Throttle body |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Weight | 0.656 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Weight | 0.76 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.30
Important compatibility info
| Weight | 2.974 kg |
| Width of castor bearing surface | 22 mm |
| Outer diameter | 70 mm. 76 mm. 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 569 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Weight | 10.2 kg |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.20
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Weight | 2.64 kg |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 122. 81 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (30779)
- 1x Febi Water Pump, engine cooling (22206)
£138.19
Important compatibility info
| Weight | 1.1 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£138.14
Important compatibility info
| Timing Chain Size | G53HS-8, G53HS-7 |
| Chain Type | Simplex, with chain lock |
| Weight | 0.392 kg |
| Placement on Vehicle | Upper |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 86 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Gasket Set, cylinder head cover (107453)
£138.14
Important compatibility info
| Fill quantity | 12.5 l |
| Weight | 3.080 kg |
| Length | 554 mm |
| Width | 346 mm |
| Material | PP (Polypropylene) |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with coolant level sensor, with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (39617)
- 1x Febi Cap, coolant tank (39913)
- 1x Febi Cap, coolant tank (40223)
- 1x Febi Sensor, coolant level (32385)
£137.91
Important compatibility info
| Weight | 2.3 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.85
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.63 kg |
| Opening Temperature | 105 °C |
| Function | Thermostat Housing |
| Type | Thermostat Housing |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch, with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.76
Important compatibility info
| Function | Alternator |
| Voltage | 24 V |
| Weight | 6.98 kg |
| Type | Alternator |
| Pulleys | without belt pulley |
| Alternator Charge Current | 65 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.75
Important compatibility info
| Weight | 1.01 kg |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£137.71
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023