Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 5.375 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 45527 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 20.7 mm |
Cone Size 2 | 25.5 mm |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45526)
- 1x Febi Nut (40161)
Important compatibility info
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Number of Wings | 12 |
Water pump impeller material | Grey Cast Iron |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
for OE number | 51.06500.6554 |
Weight | 8.250 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Plastic |
Colour | Black |
Weight | 1.433 kg |
Heating / Cooling | with jiggle pin |
Type | Cylinder Head Cover |
Function | Cylinder Head Cover |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Thread Size | M16 x 1,5 |
Paired article numbers | 188150 |
External Teeth, Wheel Side | 36 |
Weight | 5.572 kg |
External Teeth, Diff.Side | 28 |
Min. Length | 820 mm |
Wheel Sided Joint Diameter | 79 mm |
Transmission-side joint diameter | 75.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with belt pulley |
Alternator Charge Current | 90 A |
Belt Pulley Diameter | 49 mm |
Weight | 5.5 kg |
Current Strength | 90 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Function | Alternator |
Type | Alternator |
Weight | 6.35 kg |
Belt Pulley Diameter | 76 mm |
Number of Ribs | 2 |
Pulleys | with belt pulley |
Alternator Charge Current | 120 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.4 kg |
Material | Grey Cast Iron |
Number of grooves | 1 |
Number of Wings | 11 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Grey Cast Iron |
Additional Information | with gaskets/seals |
Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.52 kg |
Thickness | 56 mm |
Number of Ribs | 8 |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Valve Plate, air compressor |
Weight | 1.42 kg |
Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Function | Ignition Coil |
Ignition Coil | 3 Spark |
Number of Connectors / Ports | 4 |
Weight | 0.87 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 4 |
Pulleys | with belt pulley |
Alternator Charge Current | 95 A |
Belt Pulley Diameter | 60 mm |
Function | Alternator |
Weight | 6.412 kg |
Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.3 kg |
Function | Stabiliser Bar, suspension |
Type | Stabiliser Bar, suspension |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle |
Length | 1140 mm |
Stabiliser Diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 27 mm |
Number of Teeth | 126 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Weight | 0.620 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19943)
- 1x Febi Tensioner Pulley, timing belt (19846)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47799)
- 1x Febi Seal Cap, camshaft (23204)
- 1x Febi Seal Cap, camshaft (23205)
- 1x Febi Pulley Bolt (27259)
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 691 mm |
Mounting points diameter | 14 mm |
Pipe Diameter | 60 mm. 50 mm |
Piston conrod diameter | 16 mm |
Function | Shock Absorber |
Weight | 3.15 kg |
Shock Absorber Type | Oil Pressure |
Min. Length | 419 mm |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.78 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 853 mm |
Min. Length | 515 mm |
Pipe Diameter | 76 mm. 63.5 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.9 kg |
Pipe Diameter | 65 mm. 76 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 16 mm |
Shock Absorber Type | Oil Pressure |
Placement on Vehicle | Rear Axle |
Min. Length | 481 mm |
Max. Length | 794 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Diff.Side | 25 |
Thread Size | M20x1,5 |
Additional Information 2 | with nut |
Function | Drive Shaft |
External Teeth, Wheel Side | 24 |
Weight | 4.566 kg |
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Transmission-side joint diameter | 72.4 mm |
Wheel Sided Joint Diameter | 68.8 mm |
Min. Length | 600 mm |
Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with axle nut |
Additional Information 2 | with nut |
Thread Size | M22x1,5 |
Paired article numbers | 183634 |
External Teeth, Wheel Side | 28 |
Weight | 7.050 kg |
External Teeth, Diff.Side | 28 |
Min. Length | 586 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Cylinder Head Cover |
Additional Information | with gasket/seal |
Extra Description | febi Plus |
Function | Cylinder Head Cover |
Type | Cylinder Head Cover |
Heating / Cooling | with jiggle pin |
Material | Plastic |
Paired article numbers | 186035 |
Colour | Black |
Weight | 1.628 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M16 x 1,5, M24 x 1,5 |
Weight | 10.6 kg |
Additional Information | with piston, with piston rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 228 mm. 187 mm |
Thickness | 412 mm. 210 mm |
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023