Important compatibility info
Type | Wheel Brake Cylinder |
Piston Diameter | 20.6 mm |
Function | Wheel Brake Cylinder |
Weight | 0.4 kg |
Paired article numbers | 09616 |
Placement on Vehicle | Rear Axle Left |
Material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.174 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 114 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 83 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173202)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.550 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 17.5 mm |
Function | Ball Joint |
External Thread Size | M14 x 1,5 |
Mounting points diameter | 13 mm |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
Thickness | 60 mm |
Outer diameter | 66.5 mm |
Type | Mounting, control/trailing arm |
Inner diameter | 14.5 mm |
Weight | 0.400 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.97 kg |
Placement on Vehicle | Rear Axle |
Length | 78.8 mm |
Width | 59 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.258 kg |
Placement on Vehicle | both sides |
Length | 512 mm |
Housing Diameter | 18 mm |
Eject Force | 610 N |
Stroke | 197 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 276 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.435 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 40 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
for OE number | 357 407 615 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Length | 113 mm |
Material | Thermoplast |
Inner diameter 1 | 25 mm |
Inner diameter 2 | 88 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (15840)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (29821)
- 1x Febi Screw (31324)
Important compatibility info
Weight | 1.16 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 20.6 mm |
Mounting points diameter | 12.1 mm |
Function | Ball Joint |
External Thread Size | M18 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 203 mm |
Outer diameter | 152 mm |
Weight | 0.51 kg |
Additional Information 2 | with pre-filter |
Inner diameter | 17 mm |
Function | Air Filter |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 585 mm |
Weight | 0.150 kg |
Type | Brake Hose |
Function | Brake Hose |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.88 kg |
Placement on Vehicle | Front Axle |
Length | 69.9 mm. 84.2 mm |
Material | Rubber/Metal |
Outer diameter | 57.4 mm |
Inner diameter | 20.3 mm |
Function | Bushing, leaf spring hanger |
Type | Bushing, leaf spring hanger |
Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.32 kg |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Seal Diameter | 73 mm |
Weight | 0.050 kg |
Outer diameter | 65 mm |
Height | 124 mm |
Type | Oil Filter |
Function | Oil Filter |
Inner diameter | 21 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre, inner, Lower |
Inner diameter | 14.2 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Thickness | 65 mm |
Material | Rubber/Metal |
Outer diameter | 53.8 mm |
Weight | 0.230 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.153 kg |
Function | Lock Cylinder, ignition lock |
Lock System | with two keys |
Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1211 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Weight | 0.43 kg |
Paired article numbers | 109250 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1698 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.173 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Length | 1790 mm |
Weight | 0.590 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Outer diameter | 60 mm |
Function | Tensioner Pulley, timing belt |
Width of castor bearing surface | 32.5 mm |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.483 kg |
Placement on Vehicle | Rear Axle |
Length | 150 mm |
Width | 88 mm |
Material | Rubber/Metal |
Thickness | 60 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Left |
Cooling Hose | from engine to engine cooler |
Function | Radiator Hose |
Additional Information | with quick coupling |
Type | Radiator Hose |
Weight | 0.270 kg |
for OE number | 204 501 30 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 535 mm |
Spanner Size | 11 |
Thread Length | 8 mm |
Internal Thread Size | M10 x 1 |
External Thread Size | M10 x 1 |
Weight | 0.147 kg |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 262.5 mm |
Placement on Vehicle | both sides |
Length | 500 mm |
Housing Diameter | 18 mm |
Eject Force | 230 N |
Stroke | 222 mm |
Mounting points diameter | 8.3 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Weight | 0.32 kg |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 242 mm |
Outer diameter | 120 mm |
Weight | 1.51 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Placement on Vehicle | Rear Axle Lower, both sides, Rear |
Outer diameter | 54.5 mm |
Thickness | 60 mm |
Inner diameter | 12 mm |
Paired article numbers | 31758 |
Material | Rubber/Metal |
Shape/Form | slotted |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Placement on Vehicle | transmission sided, Rear Axle |
Length | 98 mm |
Material | Rubber |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 60 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (08414)
- 1x Febi Bellow, drive shaft (36512)
- 1x Febi Nut, kingpin (02346)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Circlip (02596)
Important compatibility info
Weight | 0.242 kg |
Length | 275 mm |
Height | 42 mm |
Width | 234 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Placement on Vehicle | Rear Axle Lower, both sides, Front |
Material | Rubber/Metal |
Outer diameter | 54 mm |
Thickness | 60 mm |
Inner diameter | 12 mm |
Paired article numbers | 31760 |
Shape/Form | slotted |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Weight | 0.408 kg |
Length | 1378 mm |
Placement on Vehicle | Left Rear |
Type | Cable Pull, parking brake |
Paired article numbers | 109488 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 146 mm |
Width | 54.7 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.564 kg |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Replaces | 16326; 16480; 16486 |
Brake System | ATE |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 174 mm |
Diameter | 1 mm |
Material | Plastic |
Spanner Size | 15 |
Paired article numbers | 192978 |
Rod/Strut | Coupling Rod |
Thread Length | 29 mm |
Weight | 0.246 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Placement on Vehicle | Rear Axle Left |
Length | 174 mm |
Diameter | 1 mm |
Material | Plastic |
Spanner Size | 15 |
Paired article numbers | 192977 |
Rod/Strut | Coupling Rod |
Thread Length | 29 mm |
Weight | 0.246 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Length | 75 mm |
Height | 53 mm |
Width | 75 mm |
Filter type | Filter Insert, Pre-Filter, with water separator |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Weight | 1.970 kg |
Placement on Vehicle | Front Axle |
Length | 156.3 mm. 155.2 mm |
Width | 67.2 mm. 62.5 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.8 mm |
Type | Brake Pad Set, disc brake |
Manufacturer | FORD MAZDA VOLVO |
Replaces | 16871 |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 262 mm |
Height | 31.5 mm |
Width | 198 mm |
Filter type | Activated Carbon Filter |
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Weight | 0.292 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 030 103 175 B |
Extra Description | febi Plus |
Function | Valve, crankcase ventilation |
Type | Valve, crankcase ventilation |
Weight | 0.011 kg |
Colour | Black |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left Rear |
Weight | 0.6 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 70 mm |
Weight | 1.90 kg |
Function | Corrugated Pipe, exhaust system |
Length | 1 m |
Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Front |
Outer diameter | 90 mm |
Thickness | 41 mm |
Paired article numbers | 39207 |
Weight | 0.350 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Hole Spacing | 151 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.84 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Mounting points diameter | 11 mm |
Function | Ball Joint |
Cone Size | 18 mm |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Ball Joint |
Additional Information | with fastening/mounting material |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Ball Joint |
Function | Ball Joint |
Weight | 0.820 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 127 mm |
Steering arm type | for control arm |
External Thread Size | M16 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 550 mm |
Outer diameter | 100 mm |
Material | PU (Polyurethane) |
Weight | 0.445 kg |
Additional Information 2 | with adapter |
Function | Spiral Hose |
Working length | 3 m |
Type | Spiral Hose |
Number of Coils | 16 |
DIN / ISO | 74323 |
Colour | Red |
External Thread Size | M22 x 1,5, M16 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Inner diameter | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Outer diameter | 122 mm |
Inner diameter | 40 mm |
Number of Ribs | 6 |
Thickness | 42 mm |
Function | Belt Pulley, water pump |
Extra Description | febi Plus |
Type | Belt Pulley, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Placement on Vehicle | Rear Axle |
Inner diameter | 21 mm |
Function | Mounting Kit, stabiliser bar |
Additional Information | with holder |
Weight | 0.516 kg |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (23358)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
Important compatibility info
Length | 135 mm |
Material | Rubber/Metal |
Inner diameter | 14 mm |
Placement on Vehicle | Front Axle |
Weight | 0.833 kg |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 50 mm |
Outer diameter | 68 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 71 mm |
Inner diameter | 17 mm |
Function | Bushing, axle beam |
Outer diameter 1 | 73 mm |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.013 kg |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Type | Sensor, coolant level |
Housing Colour | Black |
for OE number | 210 545 00 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Paired article numbers | 197162 |
Weight | 0.377 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 197161 |
Weight | 0.377 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023