Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.08 kg |
| Outer diameter | 54.8 mm |
| Opening Temperature | 83 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Length | 110 mm |
| Material | Thermoplast |
| Inner diameter 1 | 27 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 1.00 kg |
| Inner diameter 2 | 76 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (36520)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (08414)
£16.73
Important compatibility info
| Inner diameter 1 | 31 mm |
| Outer diameter | 39 mm |
| Inner diameter | 31 mm |
| Outer diameter 1 | 39 mm |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Left |
| Type | Radiator Hose |
| Weight | 0.414 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.57 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 233 mm |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M22 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Weight | 0.745 kg |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 26018 |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Additional Information | with counter nut |
| Length | 265.5 mm |
| Function | Inner Tie Rod |
| Internal Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.76 kg |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.745 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 26019 |
| DIN / ISO | 985 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.61 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 250 mm |
| External Thread Size | M16 x 1,5, M18 x 1,5 |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Length | 40 mm |
| Thickness | 43 mm |
| Weight | 0.516 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 19 mm |
| Function | Repair Kit, stabiliser bush |
| Width | 47 mm |
| Material | Rubber/Metal |
| Type | Repair Kit, stabiliser bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, stabiliser bar (32625)
- 2x Febi Bracket, stabiliser mounting (23604)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£16.73
Important compatibility info
| Material | ACM (Polyacrylate) |
| Weight | 0.05 kg |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Weight | 0.075 kg |
| Type | Thermostat, coolant |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.380 kg |
| External Thread Size | M12 x 1,25 |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 14.2 mm |
| Type | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Replaces | 15500 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.055 kg |
| Height | 68 mm |
| Outer diameter | 65 mm |
| Inner diameter | 11 mm |
| Filter type | Filter Insert |
| Function | Fuel filter |
| Seal Diameter | 70 mm |
| Inner diameter 1 | 6 mm |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Length | 88 mm |
| Material | Rubber |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 64 mm |
| Function | Bellow Kit, drive shaft |
| Weight | 0.093 kg |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (101961)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45642)
- 1x Febi High Temperature Lubricant (03630)
£16.73
Important compatibility info
| Weight | 0.132 kg |
| Housing length | 197.5 mm |
| Piston conrod diameter | 6 mm |
| Stroke | 136 mm |
| Housing Diameter | 15 mm |
| Length | 356 mm |
| Placement on Vehicle | both sides |
| Function | Gas Spring, boot/cargo area |
| Eject Force | 290 N |
| Mounting points diameter | 16.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 18 mm |
| Eject Force | 510 N |
| Stroke | 72 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 171.5 mm |
| Weight | 0.149 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 71.5 mm |
| Thickness | 60 mm |
| Weight | 0.23 kg |
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.547 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 190 mm |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Valve stem diameter | 10 mm |
| Valve head diameter | 49 mm |
| Weight | 0.179 kg |
| Notches / Holes Number | 1 |
| Type | Intake Valve |
| Function | Intake Valve |
| Length | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.454 kg |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Length | 76 mm |
| Width | 102 mm |
| Outer diameter | 52 mm |
| Thickness | 45 mm |
| Inner diameter | 18 mm |
| Paired article numbers | 22271 |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.320 kg |
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 125 mm |
| Material | Thermoplast |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 92 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (29199)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45644)
- 1x Febi Circlip (29202)
- 2x Febi Molybdenum Grease (02582)
£16.73
Important compatibility info
| Weight | 0.360 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 82 00 297 939 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Function | Timing Belt |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 119 |
| Width | 25.4 mm |
| Type | Timing Belt |
| Weight | 0.175 kg |
| Replaces | 25218 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Weight | 0.388 kg |
| Width | 193 mm |
| Function | Hydraulic Filter, automatic transmission |
| Height | 132 mm |
| Length | 224 mm |
| Type | Hydraulic Filter, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.7 mm |
| Inspection Tag | ECE R90 Approved |
| Brake System | Akebono |
| Length | 127 mm |
| Width | 48.2 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.290 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Length | 1544 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.147 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Weight | 0.190 kg |
| Joint Type | CV Joint |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Length | 113 mm |
| Material | Thermoplast |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 97 mm |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Weight | 1.02 kg |
| Placement on Vehicle | Rear Axle |
| Length | 107.6 mm |
| Width | 45.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.72
Important compatibility info
| Material | PU (Polyurethane), Rubber |
| Weight | 0.51 kg |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12499)
- 2x Febi Protective Cap/Bellow, shock absorber (12500)
£16.71
Important compatibility info
| Weight | 0.702 kg |
| Placement on Vehicle | Rear Axle |
| Length | 95.7 mm |
| Width | 41.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
| Replaces | 16440 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Weight | 0.771 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 141 mm |
| Material | Rubber/Metal |
| Outer diameter | 49 mm |
| Inner diameter | 19 mm |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Type | Lift Point Pad, jack |
| Function | Lift Point Pad, jack |
| Extra Description | febi Plus |
| Colour | Black |
| Shape/Form | round |
| Weight | 0.107 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Function | Splash Guard, brake disc |
| Weight | 0.280 kg |
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 185927 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Extra Description | febi Plus |
| Function | Hose, crankcase ventilation |
| Material | Plastic |
| Weight | 0.108 kg |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Wall Thickness | 2.5 mm |
| Hose Length | 46 mm |
| Outer diameter | 105 mm |
| Inner diameter | 83 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Weight | 0.098 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.280 kg |
| Paired article numbers | 185863 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.71
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Weight | 0.23 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 70 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42096 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Length | 87 mm |
| Material | Rubber/Metal |
| Outer diameter | 62 mm |
| Inner diameter | 24 mm |
| Function | Bush, spring eye |
| Weight | 0.858 kg |
| Type | Bush, spring eye |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Weight | 0.512 kg |
| Placement on Vehicle | Rear Axle |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, without ball bearing |
| for OE number | 1K0 513 353 G S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (23310)
- 2x Febi Screw (37952)
- 1x Febi Nut (37957)
£16.70
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 165 mm |
| Width | 70 mm |
| Inner diameter | 50 mm |
| Function | Mounting, stabiliser bar |
| Weight | 0.627 kg |
| Material | Rubber/Metal |
| Thickness | 78 mm |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 312 mm |
| Weight | 0.66 kg |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Internal Thread Size | M14 x 1,5 |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Additional Information | with nuts |
| Weight | 0.23 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 70 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42095 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Weight | 0.162 kg |
| Stroke | 86 mm |
| Mounting points diameter | 18 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Housing Diameter | 18 mm |
| Eject Force | 500 N |
| Housing length | 160.5 mm |
| Function | Gas Spring, boot/cargo area |
| Length | 321 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Length | 125 mm |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Diameter | 1 mm |
| Material | Steel |
| Spanner Size | 22 |
| Rod/Strut | Coupling Rod |
| Weight | 0.180 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Weight | 1.6 kg |
| Placement on Vehicle | Front Axle |
| Length | 86 mm |
| Cone Size | 31.5 mm |
| Additional Information | with crown nut and split pin |
| Internal Thread Size | M22 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Weight | 1.638 kg |
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 57.4 mm |
| Brake System | Bosch |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Function | Brake Pad Set, disc brake |
| Manufacturer | CITROEN PEUGEOT |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Paired article numbers | 44208 |
| Function | Mounting, control/trailing arm |
| Weight | 0.65 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Paired article numbers | 44207 |
| Function | Mounting, control/trailing arm |
| Weight | 0.65 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M12 x 1,5 |
| Cone Size | 15.4 mm |
| Mounting points diameter | 10 mm |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.70
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Weight | 0.066 kg |
| Cable Length | 340 mm |
| Type | Sensor, crankshaft pulse |
| Outer diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.69
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023