Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 880 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 6.51 kg |
| Function | Shock Absorber |
| Min. Length | 520 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.3 mm |
| Paired article numbers | 183832 |
| Weight | 7.836 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with axle nut |
| Min. Length | 610 mm |
| ABS Ring Diameter | 97 mm |
| External Teeth, Diff.Side | 30 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 92.3 mm |
| External Teeth, Wheel Side | 31 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.64
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| External Teeth, Wheel Side | 31 |
| Weight | 7.336 kg |
| Function | Drive Shaft |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 89 mm |
| Min. Length | 840 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.61
Important compatibility info
| Length | 342 mm |
| Additional Information | without oil drain plug |
| Spanner Size | 24 |
| Weight | 2.252 kg |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.52
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.50
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Weight | 10.33 kg |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| Weight | 1.050 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.37
Important compatibility info
| Min. Length | 528 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 877 mm |
| Replaces | 20193 |
| Weight | 6.36 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.37
Important compatibility info
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Length | 1952 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Weight | 14.4 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023