Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 880 mm |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 6.51 kg |
| Function | Shock Absorber |
| Min. Length | 520 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.3 mm |
| Paired article numbers | 183832 |
| Weight | 7.836 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with axle nut |
| Min. Length | 610 mm |
| ABS Ring Diameter | 97 mm |
| External Teeth, Diff.Side | 30 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 92.3 mm |
| External Teeth, Wheel Side | 31 |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.70
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 226 mm. 150 mm |
| Thickness | 205 mm. 640 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.64
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 81 mm |
| External Teeth, Wheel Side | 31 |
| Weight | 7.336 kg |
| Function | Drive Shaft |
| Additional Information 2 | with screw |
| Placement on Vehicle | Front Axle Right |
| Wheel Sided Joint Diameter | 89 mm |
| Min. Length | 840 mm |
| External Teeth, Diff.Side | 27 |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.61
Important compatibility info
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Material | Aluminium |
| Weight | 3.08 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 51.06500.6698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.58
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Length | 413 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 35 mm |
| Mounting points diameter | 15 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.50
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Weight | 10.33 kg |
| Seal Material | Rubber |
| Number of Wings | 9 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 906 200 65 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.41
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M32 x 1,5 |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Cone Size | 30.2 mm |
| Weight | 16.440 kg |
| Rod/Strut | Push Rod |
| Length | 1217 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Repair Kit, kingpin |
| Additional Information | with Thrust Bearing |
| Paired article numbers | 40129 |
| Additional Information 2 | with bearing |
| Outer diameter | 53 mm |
| Length | 235 mm |
| Placement on Vehicle | both sides |
| Type | Repair Kit, kingpin |
| Weight | 4.287 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (40730)
- 1x Febi Lock Ring, steering knuckle (40731)
- 1x Febi Lock Ring, steering knuckle (40736)
- 1x Febi Seal Ring, steering knuckle (40738)
- 1x Febi Seal Ring, steering knuckle (40737)
- 1x Febi O-Ring Repair Set (40739)
- 1x Febi Lock Ring, steering knuckle (40740)
- 4x Febi Screw (40741)
- 2x Febi Repair Kit, kingpin (40742)
- 1x Febi Grease Nipple (01096)
- 1x Febi Grease Nipple (06635)
- 1x Febi Spacer, kingpin (46436)
- 1x Febi Spacer, kingpin (46437)
- 1x Febi Spacer, kingpin (46438)
- 1x Febi Spacer, kingpin (46439)
- 1x Febi Spacer, kingpin (46440)
- 1x Febi Spacer, kingpin (46441)
£136.36
Important compatibility info
| Weight | 17.32 kg |
| Placement on Vehicle | Front Axle |
| Length | 1743 mm |
| Cone Size | 30 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 2 161 884 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 10.491 kg |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal, Rubber |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 541 200 14 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 650 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 130 mm |
| Weight | 13.4 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Weight | 0.177 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 23796-JK24B |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Inner diameter 1 | 14 mm |
| Rotation Direction | Clockwise rotation |
| Type | Hydraulic Pump, steering |
| Inner diameter 2 | 16 mm |
| Weight | 2.000 kg |
| Number of mounting bores | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Left |
| Height | 150 mm |
| Width | 400 mm |
| Additional Information 2 | with bulbs |
| Voltage | 24 V |
| Inspection Tag | ADR |
| Paired article numbers | 193029 |
| Port / Connector type | ASS4 7 pin |
| Number of Connectors / Ports | 6 |
| Light Function | with indicator, with stop light, with reverse light, with rear fog light, with reflector (triangular), with side marker light, with taillight (LED), without number plate light |
| Weight | 1.3 kg |
| Depth | 120 mm |
| Protection Type (IP Code) | IP56K |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R10, R3, R6, R7, R23, R38, R91 |
| Function | Tail Light Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 120 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 5.8 kg |
| Current Strength | 120 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Function | Clutch, radiator fan |
| Weight | 1.157 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 992 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 14.000 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 60 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 6.16 kg |
| for OE number | 004 151 79 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Pulleys | with belt pulley |
| Weight | 0.6 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Material | Aluminium |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023