Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 766 mm |
| Material | Aluminium |
| Weight | 6.2 kg |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Outer diameter | 276 mm |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.81
Important compatibility info
| Function | Alternator |
| Number of Ribs | 6 |
| Alternator Charge Current | 105 A |
| Pulleys | with belt pulley |
| Weight | 5.45 kg |
| Voltage | 12 V |
| Type | Alternator |
| Belt Pulley Diameter | 49 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.77
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 5 |
| Weight | 0.73 kg |
| for OE number | 18011-R1A- A00 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 40 mm |
| External Thread Size | M30 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 16.425 kg |
| Steering arm type | Control Arm, Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.70
Important compatibility info
| Material | Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 3.83 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.69
Important compatibility info
| Port / Connector type | Voss 232 |
| External Thread Size | M22 x 1,5 |
| Weight | 6.2 kg |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Rolling piston material | Plastic |
| Thickness | 660 mm. 300 mm |
| Outer diameter | 258 mm |
| Placement on Vehicle | Rear Axle |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.58
Important compatibility info
| Placement on Vehicle | Front Axle |
| Stabiliser Diameter | 31 mm |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Additional Information | with rubber mounts |
| Weight | 4.516 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (174334)
- 2x Febi Mounting, stabiliser bar (23046)
- 2x Febi Link/Coupling Rod, stabiliser bar (27867)
- 4x Febi Nut (22263)
- 2x Febi Screw (31033)
- 2x Febi Screw (31032)
£132.56
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 1 kW |
| Weight | 2.856 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.51
Important compatibility info
| Weight | 4.95 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 591 mm |
| Min. Length | 364 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.45
Important compatibility info
| Piston conrod diameter | 12.4 mm |
| Min. Length | 287 mm |
| Mounting points diameter | 12 mm |
| Max. Length | 363 mm |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Weight | 2.7 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.433 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Weight | 14.3 kg |
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle |
| Length | 1729 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Weight | 1.52 kg |
| Thickness | 56 mm |
| Number of Ribs | 8 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Weight | 10.350 kg |
| Extra Description | ProKit |
| Adjustable | adjustable |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Colour | Black, Green |
| Number of Connectors / Ports | 3 |
| Function | Control, swirl covers (induction pipe) |
| Weight | 0.303 kg |
| Extra Description | febi Plus |
| Type | Control, swirl covers (induction pipe) |
| for OE number | 11 61 7 579 114 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 3.903 kg |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 90 mm |
| Placement on Vehicle | Front Axle |
| Width | 44 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Weight | 7.4 kg |
| Material | Grey Cast Iron |
| Number of grooves | 1 |
| Number of Wings | 11 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.40
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 668 mm |
| Steering arm type | Trailing Arm |
| Bore Diameter | 19 mm |
| Weight | 11.060 kg |
| Hole Pitch 1/ Hole Pitch 2 | 130/130 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.39
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197341 |
| Number of Connectors / Ports | 2. 5 |
| Weight | 1.5 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.38
Important compatibility info
| Colour | Black |
| Function | Ignition Coil |
| Ignition Coil | 3 Spark |
| Number of Connectors / Ports | 4 |
| Weight | 0.87 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.36
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 95 A |
| Belt Pulley Diameter | 60 mm |
| Function | Alternator |
| Weight | 6.412 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.36
Important compatibility info
| Weight | 1.701 kg |
| Chain Type | Duplex, with chain lock |
| Number of Chain Links | 190 |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | D67HR, D67HP |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.33
Important compatibility info
| Weight | 1.74 kg |
| Type | Brake Valve, service brake |
| Function | Brake Valve, service brake |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.28
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 6.79 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.24
Important compatibility info
| Width | 27 mm |
| Number of Teeth | 126 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Weight | 0.620 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19943)
- 1x Febi Tensioner Pulley, timing belt (19846)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (47799)
- 1x Febi Seal Cap, camshaft (23204)
- 1x Febi Seal Cap, camshaft (23205)
- 1x Febi Pulley Bolt (27259)
£132.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 691 mm |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 3.15 kg |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 419 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.15
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 6.89 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Pipe Diameter | 80 mm. 70 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Max. Length | 699 mm |
| Min. Length | 409 mm |
| Replaces | 20167; 20612 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.15
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 569 mm |
| Mounting points diameter | 19 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Weight | 10.2 kg |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.07
Important compatibility info
| Weight | 2.87 kg |
| Type | Crankshaft, air compressor |
| Function | Crankshaft, air compressor |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.07
Important compatibility info
| Material | Cast Steel |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Weight | 8.8 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.06
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 183634 |
| External Teeth, Wheel Side | 28 |
| Weight | 7.050 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 586 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£132.03
Important compatibility info
| Weight | 5.19 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 472 mm |
| Min. Length | 332 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 24 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Replaces | 20056; 20070 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.99
Important compatibility info
| Number of Teeth | 131 |
| Surface | Coated |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Weight | 1.748 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (23413)
- 1x Febi Water Pump, engine cooling (24194)
£131.94
Important compatibility info
| Weight | 0.194 kg |
| for OE number | 10921-AA080 |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.90
Important compatibility info
| Weight | 1.1 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.83
Important compatibility info
| Weight | 1.734 kg |
| Surface | Coated |
| Width | 20 mm |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Number of Teeth | 163 |
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Replaces | 172703 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173327)
- 1x Febi Water Pump, engine cooling (103082)
£131.68
Important compatibility info
| Function | Cooler, exhaust gas recirculation |
| Type | Cooler, exhaust gas recirculation |
| Weight | 0.497 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.67
Important compatibility info
| Weight | 0.680 kg |
| Type | Oil Pump |
| Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.64
Important compatibility info
| Weight | 3.245 kg |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Height | 524 mm |
| Inner diameter | 178 mm |
| Outer diameter | 302 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.63
Important compatibility info
| Function | Brake Drum |
| Type | Brake Drum |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 50 mm |
| Outer diameter | 261 mm |
| Thickness | 74.2 mm |
| Rim Hole Number | 4 -Hole |
| Max.skimmed drum measure | 228.5 mm |
| Weight | 8.35 kg |
| Centering Diameter | 61.9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Inner diameter | 228.6 mm |
| Additional Information 2 | with wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.54
Important compatibility info
| Weight | 8.8 kg |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 62.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | internally vented, two-piece brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.53
Important compatibility info
| Weight | 0.982 kg |
| for OE number | 21789668 |
| Inner Length | 3055 mm |
| Outer Length | 3322 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Inner diameter 1 | 110 mm |
| Inner diameter 2 | 100 mm |
| Outer diameter 1 | 170 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Width 1 | 47 mm |
| Outer diameter 2 | 157 mm |
| Width 2 | 42 mm |
| Additional Information | with fastening/mounting material |
| Weight | 8.609 kg |
| Type | Wheel Bearing Kit |
| for OE number | 940 350 03 35 S1 |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Shaft Seal, wheel hub (05354)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Wheel Bearing (23314)
- 1x Febi Wheel Bearing (45806)
£131.41
Important compatibility info
| Weight | 0.159 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186660 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Placement on Vehicle | Front Axle Right, outer |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193402 |
| Weight | 6.241 kg |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 100 A |
| Belt Pulley Diameter | 54 mm |
| Number of Connectors / Ports | 2 |
| Weight | 6.6 kg |
| Current Strength | 100 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Weight | 10.500 kg |
| Bore Diameter | 19 mm |
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Length | 540 mm |
| Material | Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.41
Important compatibility info
| Material | Plastic |
| Colour | Black, White |
| Number of Connectors / Ports | 5 |
| Type | Control, swirl covers (induction pipe) |
| Function | Control, swirl covers (induction pipe) |
| Extra Description | febi Plus |
| Weight | 0.284 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.39
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Function | Control, swirl covers (induction pipe) |
| Extra Description | febi Plus |
| Weight | 0.285 kg |
| Type | Control, swirl covers (induction pipe) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.39
Important compatibility info
| Outer diameter | 192 mm |
| Thickness | 50 mm |
| Inner diameter | 34 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Weight | 3.53 kg |
| Replaces | 26888 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£131.37
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023