Important compatibility info
Weight | 0.080 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 450 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.607 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (21011)
- 2x Febi Screw (12604)
Important compatibility info
Length | 320 mm |
Weight | 0.46 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 112 mm |
Inner diameter 1 | 34 mm |
Material | Thermoplast |
Length | 170 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18575)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45648)
- 3x Febi Molybdenum Grease (02582)
Important compatibility info
Opening Temperature | 85 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Weight | 0.112 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Number of Connectors / Ports | 3 |
Temperature range from | 92 °C |
Temperature range to | 101 °C |
Function | Temperature Switch, radiator fan |
External Thread Size | M22 x 1,5 |
Type | Temperature Switch, radiator fan |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.34 kg |
Placement on Vehicle | Front |
Length | 80 mm |
Material | Rubber/Metal |
Inner diameter | 16 mm |
Outer diameter | 55 mm |
Outer diameter 1 | 50 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 485 mm |
Housing Diameter | 18 mm |
Eject Force | 450 N |
Stroke | 200 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 263.5 mm |
Weight | 0.260 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Weight | 0.17 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 585 mm |
Spanner Size | 17 |
Function | Brake Hose |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.063 kg |
Material | Plastic |
Function | Cap, coolant tank |
Opening Pressure | 2 bar |
for OE number | 17 11 7 639 021 |
Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Inner diameter 1 | 21 mm |
Additional Information 2 | with seal ring |
Filter type | Filter Insert |
Gasket outer diameter | 98 mm |
Type | Oil Filter |
Outer diameter | 77 mm |
Height | 107 mm |
Weight | 0.092 kg |
Inner diameter | 30 mm |
Gasket inner diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.985 kg |
Placement on Vehicle | Outer |
Inner diameter | 246 mm |
Mounting bores distance | 164 mm |
Mounting points diameter | 11 mm |
Function | Fixing Strap, compressed-air tank |
Type | Fixing Strap, compressed-air tank |
Material | Sheet Steel |
Colour | black |
Bolt Head/Nut Design | Male Hex |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 16 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Weight | 0.42 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
Length | 72 mm |
Material | Rubber/Metal |
Outer diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Length | 99 mm |
Notches / Holes Number | 3 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Material | FPM (fluoride rubber) |
Function | Repair Kit, shift cylinder |
Type | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.530 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 18 mm |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.110 kg |
Friction Lining Material | Plastic |
Length | 210 mm |
Material | Plastic |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.271 kg |
Material | Aluminium |
Outer diameter | 64 mm |
Inner diameter | 14 mm |
Paired article numbers | 17452 |
Placement on Vehicle | Rear Axle Left, Rear, Rear Axle Right |
Thickness | 60 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.327 kg |
Length | 95 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100213)
- 1x Febi Clamping Clip (29820)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Function | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Brake Type | Disc Brake |
Length | 590 mm |
Number of Connectors / Ports | 2 |
Weight | 0.024 kg |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Placement on Vehicle | Rear |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1310575080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (07977)
- 1x Febi Securing Plate, ball joint (14238)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.526 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 7 |
Control Type | Push Actuation |
Function | Hazard Warning Light Switch |
Extra Description | febi Plus |
Type | Hazard Warning Light Switch |
Placement on Vehicle | Dashboard |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.417 kg |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Length | 69 mm |
Material | Rubber |
Outer diameter | 35 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Cone Size | 18 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Mounting points diameter | 10.5 mm |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.146 kg |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Function | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Length | 181 mm |
Additional Information 2 | with nut |
Weight | 0.702 kg |
Type | Tie Rod End |
Spanner Size | 19 |
Paired article numbers | 180278 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Placement on Vehicle | both sides |
Length | 500 mm |
Housing Diameter | 18 mm |
Eject Force | 350 N |
Stroke | 205 mm |
Mounting points diameter | 17.5 mm. 17.8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 269.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.075 kg |
Material | NBR (nitrile butadiene rubber) |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Paired article numbers | 34907 |
Length | 1004 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.448 kg |
Placement on Vehicle | Upper Front Axle |
Material | Rubber/Metal |
Outer diameter | 66 mm |
Thickness | 76 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 88 °C |
Function | Thermostat, coolant |
Weight | 0.096 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Replaces | 11445 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Thickness | 20 mm |
Function | Nut, kingpin |
Spanner Size | 67 |
Internal Thread Size | M52 x 1,5 |
Bolt Head/Nut Design | Male Star |
Type | Nut, kingpin |
Weight | 0.191 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.034 kg |
Length | 78 mm |
Operating Mode | Electric |
Function | Stop Light Switch |
Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.390 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.25 kg |
Placement on Vehicle | Front Axle |
Length | 127.5 mm |
Width | 49 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16542 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.255 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 95 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 26 mm |
Inner diameter 2 | 77 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (172866)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.024 kg |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 8 mm |
Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
Outer diameter | 50 mm |
Inner diameter | 24 mm |
Colour | Black |
Function | Shaft Seal, camshaft |
Weight | 0.01 kg |
Type | Shaft Seal, camshaft |
Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 181 mm |
Additional Information 2 | with crown nut |
Placement on Vehicle | Front Axle Left |
Spanner Size | 19 |
Paired article numbers | 180271 |
Weight | 0.702 kg |
Type | Tie Rod End |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 92 mm |
Material | Steel |
Thickness | 77 mm |
Colour | Black |
Thread Length | 22 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Weight | 0.330 kg |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.096 kg |
Placement on Vehicle | Front Axle |
Length | 80 mm |
Width | 64 mm |
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.33 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 37354 |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 692 412 |
Function | Washer Fluid Pump, window cleaning |
Pump Type | Dual Pump |
Number of Connectors / Ports | 2 |
Weight | 0.11 kg |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.33 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 37355 |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Placement on Vehicle | Front Axle Right |
Length | 700 mm |
Spanner Size | 15 |
Paired article numbers | 178636 |
Thread Length | 10 mm |
Weight | 0.148 kg |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Hose |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left |
Length | 700 mm |
Spanner Size | 12 |
Paired article numbers | 178631 |
Thread Length | 10 mm |
Weight | 0.149 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Weight | 0.045 kg |
Cable Length | 1100 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
for OE number | T4A 13370 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023