Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 112 mm |
| Inner diameter 1 | 34 mm |
| Material | Thermoplast |
| Length | 170 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (18575)
- 1x Febi Clamping Clip (38759)
- 1x Febi Clamping Clip (45648)
- 3x Febi Molybdenum Grease (02582)
£15.05
Important compatibility info
| Voltage from | 12 V |
| Voltage to | 24 V |
| Protection Type (IP Code) | IP67 |
| Function | End Outline Marker Light |
| Port / Connector type | PRS |
| Colour | White |
| Cable Length | 500 mm |
| Fulfils ECE norm | R3, R7 |
| Type | End Outline Marker Light |
| Width | 111 mm |
| Height | 50 mm |
| Depth | 24 mm |
| Weight | 0.111 kg |
| Light Design | LED |
| Mounting bores distance | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Weight | 0.073 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.075 kg |
| Material | NBR (nitrile butadiene rubber) |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.238 kg |
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Stroke | 205 mm |
| Mounting points diameter | 17.5 mm. 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 269.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.47 kg |
| for OE number | 028 105 263 D S1 |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25170)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Weight | 0.063 kg |
| Material | Plastic |
| Function | Cap, coolant tank |
| Opening Pressure | 2 bar |
| for OE number | 17 11 7 639 021 |
| Type | Cap, coolant tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.096 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| Replaces | 11445 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.034 kg |
| Length | 78 mm |
| Operating Mode | Electric |
| Function | Stop Light Switch |
| Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.078 kg |
| for OE number | 2105.50 |
| Type | Guide Sleeve, clutch |
| Function | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 1.25 kg |
| Placement on Vehicle | Front Axle |
| Length | 127.5 mm |
| Width | 49 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Replaces | 16542 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| for OE number | 028 105 263 E S1 |
| Weight | 0.47 kg |
| Placement on Vehicle | Front |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Number of Teeth | 22 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25166)
- 1x Febi Pulley Bolt (09590)
£15.05
Important compatibility info
| Opening Temperature | 85 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.112 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.515 kg |
| Placement on Vehicle | Left Rear |
| Length | 1924 mm |
| Paired article numbers | 36674 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
| Additional Information | with accessories |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.530 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Cone Size | 18 mm |
| Type | Ball Joint |
| Additional Information 2 | with bolts/screws |
| Steering arm type | for control arm |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Placement on Vehicle | Lower Front Axle |
| Cone Size | 13.5 mm |
| Function | Ball Joint |
| Weight | 0.406 kg |
| Type | Ball Joint |
| External Thread Size | M20 x 1,5 |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.111 kg |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.198 kg |
| Placement on Vehicle | both sides |
| Length | 333 mm |
| Housing Diameter | 19 mm |
| Eject Force | 680 N |
| Stroke | 100 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 170.5 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.526 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
Important compatibility info
| Weight | 0.211 kg |
| Length | 1155 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023