Important compatibility info
Placement on Vehicle | Upper, Left |
Weight | 0.35 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 1154 mm |
Placement on Vehicle | Rear Axle Left |
Weight | 0.069 kg |
Function | Sensor, wheel speed |
Paired article numbers | 106968 |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Placement on Vehicle | transmission sided |
Width | 9 mm |
Material | PTFE (polytetrafluoroethylene) |
Outer diameter | 100 mm |
Inner diameter | 78 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 132 mm |
Material | Rubber |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 52 mm |
Function | Bellow Kit, steering |
Weight | 0.220 kg |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Clamping Clip (38762)
- 2x Febi Clamping Clip (38764)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 240 mm |
Filter type | Filter Insert |
Height | 48 mm |
Width | 170 mm |
Function | Air Filter |
Type | Air Filter |
Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.281 kg |
Number of Teeth | 22 |
Engine Management | Timing Belt |
Function | Sprocket, crankshaft |
Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, control/trailing arm |
Weight | 0.574 kg |
Placement on Vehicle | Rear, Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Inner diameter | 16.2 mm |
Thickness | 77 mm |
Outer diameter | 70.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.08 kg |
Length | 89 mm |
Valve stem diameter | 7 mm |
Notches / Holes Number | 3 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 86 mm |
Outer diameter | 70 mm |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
Weight | 0.350 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 1776 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 109295 |
Number of Connectors / Ports | 2 |
Weight | 0.086 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.323 kg |
Placement on Vehicle | Rear Axle Left, Outer, Lower, Rear Axle Right |
Length | 57 mm |
Outer diameter | 45 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 340 mm |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.700 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Cone Size | 20 mm |
Mounting points diameter | 10.5 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, with chain lock |
Number of Chain Links | 44 |
Timing Chain Size | G67WZ |
Function | Chain, oil pump drive |
Weight | 0.174 kg |
Type | Chain, oil pump drive |
Additional Information
Technical Information
Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Length | 570 mm |
Weight | 0.066 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 240 mm |
Housing Diameter | 18 mm |
Eject Force | 380 N |
Stroke | 90 mm |
Mounting points diameter | 8.3 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 136.5 mm |
Type | Gas Spring, bonnet |
Weight | 0.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.54 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Width | 22.8 mm |
Outer diameter | 80 mm |
Inner diameter | 35 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 14 mm |
Weight | 0.52 kg |
Placement on Vehicle | Rear Axle Right |
Length | 143 mm |
Material | Steel |
Inner diameter | 12 mm |
Paired article numbers | 32574 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 14 mm |
Weight | 0.52 kg |
Placement on Vehicle | Rear Axle Left |
Length | 143 mm |
Material | Steel |
Inner diameter | 12 mm |
Paired article numbers | 32573 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 309 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Surface | Painted |
External Thread Size | M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.25 kg |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Length | 115 mm |
Thickness | 85 mm |
Spanner Size | 22 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Inner diameter | 81 mm |
Length | 434 mm |
Weight | 0.36 kg |
Outer diameter | 119 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.295 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 117 mm |
Rod/Strut | Coupling Rod |
External Thread Size | M8 x 1,25, M10 x 1,5 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.390 kg |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Length | 286 mm |
Material | Steel |
Paired article numbers | 24912 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.23 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 89 mm |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Colour | Black |
Surface | Painted |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.570 kg |
Placement on Vehicle | Front Axle Left, Outer |
Paired article numbers | 01854 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.390 kg |
Length | 286 mm |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Paired article numbers | 24913 |
Rod/Strut | Coupling Rod |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.345 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 17 mm |
Outer diameter | 59 mm. 45 mm |
Inner diameter | 32 mm. 19 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (08253)
Important compatibility info
Eject Force | 440 N |
Housing Diameter | 19 mm |
Placement on Vehicle | both sides |
Length | 349 mm |
Weight | 0.174 kg |
Stroke | 127 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 200.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.087 kg |
Width | 72 mm |
Length | 80 mm |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 108 mm |
Width | 45.1 mm |
Inspection Tag | ECE R90 Not Required |
Weight | 0.860 kg |
Thickness/Strength 1 | 15.6 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.28 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 167 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M10 x 1,5 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.80 kg |
Type | Air Filter |
Function | Air Filter |
Filter type | Filter Insert |
Height | 174 mm |
Outer diameter | 222 mm |
Inner diameter | 120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 465 mm |
Function | Brake Hose |
Weight | 0.12 kg |
Internal Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 88 mm |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Weight | 0.300 kg |
Internal Thread Size | M15 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 271 mm |
Weight | 0.47 kg |
Type | Air Filter |
Function | Air Filter |
Filter type | Filter Insert |
Height | 66 mm |
Width | 217 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.13 kg |
Number of Ribs | 5 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1644 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Brake Cylinder |
Weight | 0.157 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Piston Diameter | 17.8 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Seal Diameter | 63.8 mm |
Outer diameter | 74 mm |
Inner diameter | 36 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Height | 78 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of circuits | 8 |
Cable Length | 100 mm |
Function | Cable Repair Set, interior blower motor |
Extra Description | febi Plus |
Type | Cable Repair Set, interior blower motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 208 mm |
Height | 54 mm |
Width | 116 mm |
Filter type | Pollen Filter |
Weight | 0.086 kg |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 140 mm |
Diameter | 1 mm |
Additional Information | with nuts |
Material | Steel |
Rod/Strut | Coupling Rod |
Thread Length | 23 mm |
Weight | 0.354 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.138 kg |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.700 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 24023 |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.234 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 97 mm |
Inner diameter 1 | 29 mm |
Material | Thermoplast |
Length | 115 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Weight | 0.52 kg |
Function | Ball Joint |
Type | Ball Joint |
Additional Information | with nuts |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (17715)
- 3x Febi Nut (24361)
- 3x Febi Screw (24362)
Important compatibility info
Weight | 0.700 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 24024 |
Function | Tie Rod End |
Additional Information | with lock nut |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Type | Coolant Flange |
for OE number | 11 11 8 511 205 |
Weight | 0.06 kg |
Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 59 mm |
Length | 487 mm |
Type | Air Filter |
Function | Air Filter |
Weight | 0.29 kg |
Filter type | Filter Insert |
Width | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.541 kg |
Length | 315 mm |
Height | 80 mm |
Width | 277 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023