Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 108 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Function | Cap, fuel tank |
| Inner diameter | 60 mm |
| Material | Plastic |
| Extra Description | febi Plus |
| Weight | 0.096 kg |
| Type | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Aluminium |
| Additional Information 2 | without ball bearing |
| Inner diameter | 11 mm |
| Placement on Vehicle | Rear Axle |
| Replaces | 22986 |
| Weight | 0.28 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.194 kg |
| Material | Rubber/Metal |
| Function | Flange, carburettor |
| Type | Flange, carburettor |
| Replaces | 12129 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Replaces | 41710 |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15.1 mm |
| Mounting points diameter | 12.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Right |
| Length | 362 mm |
| Width | 165 mm |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.28 kg |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 760 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.214 kg |
| Paired article numbers | 34912 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 0.086 kg |
| Material | PU (Polyurethane) |
| Length | 134 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.017 kg |
| Type | Stop Light Switch |
| Housing Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.034 kg |
| Additional Information 2 | with mounting sleeve |
| Placement on Vehicle | frontal sided |
| Width | 10 mm |
| Material | PTFE (polytetrafluoroethylene), AEM (Ethylene Acrylate Rubber) |
| Outer diameter | 79 mm |
| Inner diameter | 65 mm |
| Rotation Direction | Clockwise rotation |
| Type | Shaft Seal, crankshaft |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.035 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 95 °C. 90 °C |
| Colour Coding | Blue |
| Function | Temperature Switch, radiator fan |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.4 kg |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Right |
| Length | 110 mm |
| Thickness | 68 mm |
| Spanner Size | 17 |
| Paired article numbers | 42720 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter 2 | 43 mm |
| Inner diameter 1 | 45 mm |
| Weight | 0.200 kg |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 17 |
| Thickness | 75 mm |
| Internal Thread Size | M16 x 1,5 |
| Material | Steel |
| Thread Length | 22 mm |
| External Thread Size | M10 x 1,5 |
| Colour | Black |
| Function | Tie Rod End |
| Weight | 0.312 kg |
| Type | Tie Rod End |
| Additional Information | with lock nut |
| Length | 92 mm |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 10590 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.248 kg |
| Length | 253 mm |
| Height | 36 mm |
| Width | 217 mm |
| Filter type | Filter Insert, Activated Carbon Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Material | Thermoplast |
| Weight | 0.215 kg |
| Type | Bellow Kit, drive shaft |
| Length | 107 mm |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38760)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Circlip (24138)
£14.06
Important compatibility info
| Weight | 0.259 kg |
| Function | Hydraulic Filter, automatic transmission |
| Height | 73 mm |
| Type | Hydraulic Filter, automatic transmission |
| Width | 126 mm |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Weight | 0.118 kg |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Thickness | 11 mm |
| Placement on Vehicle | frontal sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.052 kg |
| Inner diameter | 78 mm |
| Function | Shaft Seal, crankshaft |
| Outer diameter | 104 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Outer diameter | 153 mm |
| Type | Shaft Seal, crankshaft |
| Material | PTFE (polytetrafluoroethylene) |
| Weight | 0.08 kg |
| Width | 13 mm |
| Placement on Vehicle | frontal sided |
| Inner diameter | 135 mm |
| Function | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.600 kg |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 195 mm |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.030 kg |
| Thickness | 54 mm |
| Spanner Size | 19 |
| Number of Connectors / Ports | 1 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Weight | 0.07 kg |
| Width | 17 mm |
| Number of Teeth | 95 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.216 kg |
| Length | 395 mm |
| Height | 30 mm |
| Width | 260 mm |
| Filter type | Pollen Filter |
| Function | Filter, cabin air |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Spanner Size | 80 |
| Function | Nut, kingpin |
| Thickness | 21.6 mm |
| Type | Nut, kingpin |
| Weight | 0.277 kg |
| Internal Thread Size | M60 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 92 °C. 97 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 136 mm |
| Paired article numbers | 26152 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023