Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.094 kg |
| Material | Plastic |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22 mm |
| Mounting points diameter | 17 mm |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.12 kg |
| Width | 15 mm |
| Number of Teeth | 129 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.264 kg |
| Additional Information 2 | with oil sump gasket |
| Height | 46 mm |
| Length | 244 mm |
| Width | 152 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | FPM (fluoride rubber) |
| Outer diameter | 125 mm |
| Thickness | 12 mm |
| Inner diameter | 105 mm |
| Function | Shaft Seal, manual transmission |
| Weight | 0.66 kg |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 136 mm |
| Paired article numbers | 26152 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M12 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.030 kg |
| Thickness | 54 mm |
| Spanner Size | 19 |
| Number of Connectors / Ports | 1 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 006 542 34 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Extra Description | ProKit |
| External Thread Size | M10 x 1,5 |
| Spanner Size | 17 |
| Additional Information 2 | with nut |
| Length | 57 mm |
| Function | Ball Head, gearshift linkage |
| Type | Ball Head, gearshift linkage |
| Weight | 0.135 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.14 kg |
| Placement on Vehicle | both sides |
| Length | 255 mm |
| Housing Diameter | 15 mm |
| Eject Force | 420 N |
| Stroke | 104 mm |
| Mounting points diameter | 8.3 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 143.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Weight | 0.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.48 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 136 mm |
| Paired article numbers | 26153 |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Length | 145 mm |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 98 mm |
| Placement on Vehicle | Front Axle, Wheel Side |
| Weight | 0.25 kg |
| Function | Bellow Kit, drive shaft |
| Material | Thermoplast |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Function | Cap, fuel tank |
| Inner diameter | 60 mm |
| Material | Plastic |
| Extra Description | febi Plus |
| Weight | 0.096 kg |
| Type | Cap, fuel tank |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Inner diameter | 27 mm |
| Function | Mounting, stabiliser bar |
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.160 kg |
| Width | 105 mm |
| Filter type | Pollen Filter |
| Height | 26 mm |
| Length | 250.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter 2 | 43 mm |
| Inner diameter 1 | 45 mm |
| Weight | 0.200 kg |
| Turbocharger line | Piping to charge air cooler |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.244 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Outer diameter | 59 mm. 24 mm |
| Thickness | 55 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.03 kg |
| Placement on Vehicle | transmission sided |
| Width | 8.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 105 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Replaces | 11813 |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 300 mm |
| Function | Inner Tie Rod |
| Weight | 0.615 kg |
| External Thread Size | M12 x 1,5 |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.348 kg |
| Height | 160 mm |
| Width | 102 mm |
| Port / Connector type | DIN Connector |
| Fastening Type | 2-point attachment |
| DIN / ISO | 72591 |
| Number of circuits | 2 |
| Type | Holder, rotating beacon |
| Function | Holder, rotating beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.05 kg |
| Length | 104.5 mm |
| Valve head diameter | 24.54 mm |
| Notches / Holes Number | 1 |
| Function | Exhaust Valve |
| Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023