Important compatibility info
Weight | 0.312 kg |
Placement on Vehicle | Front Axle Right |
Length | 90 mm |
Paired article numbers | 12575 |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M20 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.306 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Length | 170 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Length | 24 mm |
Rod/Strut | Coupling Rod |
Spanner Size | 15 |
Diameter | 1 mm |
Material | Steel |
External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Type | Filter, cabin air |
Weight | 0.0258 kg |
Width | 176 mm |
Height | 10 mm |
Length | 195 mm |
Filter type | Pollen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Steering arm type | for control arm |
Additional Information 2 | with bolts/screws |
Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
Inner diameter | 10.5 mm |
Weight | 0.580 kg |
Function | Ball Joint |
Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 119 mm |
Tightening Torque | 20 Nm |
Type | Lid, urea filter housing |
Function | Lid, urea filter housing |
Outer diameter | 92 mm |
Weight | 0.090 kg |
Bolt Head/Nut Design | Male Hex |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Ball Joint |
Cone Size | 20 mm |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 58 mm |
Filter type | In-Line Filter |
Weight | 0.120 kg |
Pipe Diameter | 8 mm |
Height | 146 mm |
Function | Fuel filter |
Type | Fuel filter |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Weight | 0.55 kg |
Additional Information | with nuts |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
for OE number | 3640.48 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (19468)
- 3x Febi Nut (24361)
- 3x Febi Screw (24362)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Cable Length | 875 mm |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Weight | 0.043 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.69 kg |
Placement on Vehicle | Front Axle Right |
Material | Steel |
Paired article numbers | 31712 |
Colour | Black |
Thread Type | with right-hand thread |
Function | Tie Rod End |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.063 kg |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Width | 60 mm |
Length | 70 mm |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
Length | 182 mm |
Thickness | 76 mm |
Spanner Size | 19 |
Function | Tie Rod End |
External Thread Size | M12 x 1,25 |
Weight | 0.54 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Placement on Vehicle | Rear Axle |
Length | 78.4 mm |
Width | 52 mm. 55.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 13.9 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.079 kg |
Function | Gasket, cylinder head cover |
Material | NBR (nitrile butadiene rubber) |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Outer, Front Axle Right |
Weight | 0.246 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Inner diameter | 16.3 mm |
Outer diameter | 52.4 mm |
Thickness | 72 mm |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.014 kg |
Placement on Vehicle | frontal sided |
Outer diameter | 66 mm |
Thickness | 6 mm |
Inner diameter | 42 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1125 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Function | V-Ribbed Belt |
Weight | 0.134 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Right |
Paired article numbers | 193057 |
Weight | 0.3 kg |
Type | Hinge, bonnet |
Function | Hinge, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 0.3 kg |
Type | Mounting, engine |
for OE number | 77 00 800 522 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 72 mm |
Filter type | Spin-on Filter |
Height | 171 mm |
Outer diameter | 94 mm |
Function | Oil Filter |
Weight | 0.721 kg |
Internal Thread Size | M22 x 1,5 |
Type | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right, Left |
Paired article numbers | 193056 |
Weight | 0.3 kg |
Type | Hinge, bonnet |
Function | Hinge, bonnet |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.42 kg |
External Thread Size | M12 x 1,25 |
Additional Information | with nuts |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 280 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Colour | Black |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.370 kg |
Placement on Vehicle | Rear Axle Left |
Length | 235 mm |
Rod/Strut | Coupling Rod |
Quality/ Grade | 10 |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shaft Seal, differential |
Type | Shaft Seal, differential |
Inner diameter | 40 mm |
Weight | 0.04 kg |
Material | ACM (Polyacrylate) |
Outer diameter | 55 mm |
Placement on Vehicle | Left, Right |
Width | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.53 kg |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Cone Size | 18 mm |
Function | Ball Joint |
Type | Ball Joint |
External Thread Size | M16 x 1,5 |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 125 mm |
Weight | 0.495 kg |
Length | 155 mm |
Height | 55 mm |
Width | 60 mm |
Material | Rubber/Metal |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.196 kg |
Length | 1920 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 294 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Weight | 0.600 kg |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.036 kg |
Number of Ribs | 3 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 798 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Rear, Lower, Front Axle Right |
Outer diameter | 64 mm |
Thickness | 55 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023