Important compatibility info
Function | Gasket, cylinder head cover |
Thickness | 9 mm |
Material | NBR (nitrile butadiene rubber) |
Width | 313 mm |
Length | 505 mm |
Weight | 0.052 kg |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.348 kg |
Height | 160 mm |
Width | 102 mm |
Port / Connector type | DIN Connector |
Fastening Type | 2-point attachment |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 145 mm |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 98 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Weight | 0.25 kg |
Function | Bellow Kit, drive shaft |
Material | Thermoplast |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.335 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Width | 105 mm |
Material | Rubber/Metal |
Outer diameter | 55 mm. 26 mm |
Thickness | 45 mm |
Inner diameter | 20 mm. 11 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.264 kg |
Additional Information 2 | with oil sump gasket |
Height | 46 mm |
Length | 244 mm |
Width | 152 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Shape/Form | rectangular |
Weight | 0.112 kg |
Height | 62 mm |
Length | 90 mm |
Width | 64 mm |
Material | Plastic |
Colour | Black |
Type | Lift Point Pad, jack |
Function | Lift Point Pad, jack |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Placement on Vehicle | Front Axle |
Additional Information 2 | with fastening material, without ball bearing |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34391)
- 1x Febi Nut (24375)
- 1x Febi Washer (01965)
Important compatibility info
Function | Wheel Brake Cylinder |
Material | Aluminium |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.210 kg |
Piston Diameter | 20.6 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
for OE number | 129 545 02 24 |
Function | Sensor, coolant level |
Number of Connectors / Ports | 2 |
Housing Colour | Black/White |
Type | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.904 kg |
Placement on Vehicle | Front Axle |
Length | 72 mm |
Width | 60.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.094 kg |
Material | Plastic |
Outer diameter | 70 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 22 mm |
Mounting points diameter | 17 mm |
Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Function | Tie Rod End |
Length | 110 mm |
Thickness | 68 mm |
Spanner Size | 17 |
Paired article numbers | 42721 |
Placement on Vehicle | Front Axle Left |
Weight | 0.4 kg |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with pre-filter |
Weight | 0.35 kg |
Filter type | Filter Insert |
Width | 232 mm |
Length | 350 mm |
Height | 44 mm |
Function | Air Filter |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wet Boiling Point | 250 °C |
Weight | 0.165 kg |
Length | 1215 mm |
Extra Description | febi Plus |
Function | Oil Dipstick, automatic transmission |
Length from grip collar to min. marking | 1144 mm. 1095 mm |
Length from grip collar to max. marking | 1133 mm. 1089 mm |
Colour | Red |
Type | Oil Dipstick, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.199 kg |
Length | 70 mm |
Width | 54 mm |
Outer diameter | 41 mm |
Thickness | 54 mm |
Inner diameter | 16.5 mm |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Placement on Vehicle | Rear Axle |
Length | 1243 mm |
Colour | Black, Grey |
Number of Connectors / Ports | 2 |
Brake Type | Disc Brake |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 104.5 mm |
Valve head diameter | 24.54 mm |
Notches / Holes Number | 1 |
Function | Exhaust Valve |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Placement on Vehicle | Rear Axle, Wheel Side, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 100 mm |
Inner diameter 1 | 21 mm |
Material | Rubber |
Length | 96 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03362)
- 1x Febi Clamping Clip (38758)
- 6x Febi Bolt, drive shaft flange (03004)
- 1x Febi Spring Washer (07253)
- 1x Febi Circlip (03335)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.223 kg |
Placement on Vehicle | Wheel Side, Rear Axle |
Material | Rubber |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 57 mm |
Inner diameter 1 | 25 mm |
Length | 70 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36557)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Outer diameter | 120 mm |
Inner diameter | 15 mm |
Weight | 0.780 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 49 mm |
Additional Information 2 | without ball bearing |
for OE number | 03 44 543 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023