Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.04 kg |
| Number of Connectors / Ports | 2 |
| Switch Point | 92 °C. 97 °C |
| Function | Temperature Switch, radiator fan |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.237 kg |
| Function | Screw Set, gears (timing chain) |
| Type | Screw Set, gears (timing chain) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Screw (101125)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 1x Febi Quill, cylinder head (101129)
- 1x Febi Bolt, camshaft gear (46364)
£14.06
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | Rear |
| Material | FPM (fluoride rubber) |
| Outer diameter | 75 mm |
| Thickness | 10 mm |
| Inner diameter | 43 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.017 kg |
| Type | Stop Light Switch |
| Housing Colour | Blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Replaces | 41710 |
| Weight | 0.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Cone Size | 15.1 mm |
| Mounting points diameter | 12.2 mm |
| Type | Ball Joint |
| Function | Ball Joint |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Guide, timing chain |
| Friction Lining Material | Plastic |
| Placement on Vehicle | Left |
| Weight | 0.118 kg |
| Type | Guide, timing chain |
| Hole Spacing | 214 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.28 kg |
| Placement on Vehicle | Lower Right |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Valve stem diameter | 6.9 mm |
| Valve head diameter | 33.5 mm |
| Function | Intake Valve |
| Length | 113.3 mm |
| Weight | 0.075 kg |
| Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 1.0 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Ball Joint |
| Function | Ball Joint |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.167 kg |
| Length | 1427 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.255 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| for OE number | 1351.RE SK |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.312 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Suspension Strut Support Mount (47358)
£14.06
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Material | Thermoplast |
| Weight | 0.215 kg |
| Type | Bellow Kit, drive shaft |
| Length | 107 mm |
| Inner diameter 1 | 40 mm |
| Inner diameter 2 | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (45645)
- 1x Febi Clamping Clip (38760)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Circlip (24138)
£14.06
Important compatibility info
| Weight | 0.215 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 108 mm |
| Inner diameter 1 | 24 mm |
| Material | Rubber |
| Length | 129 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (14069)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£14.06
Important compatibility info
| Weight | 0.12 kg |
| Width | 15 mm |
| Number of Teeth | 129 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.095 kg |
| Opening Temperature | 92 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Weight | 0.086 kg |
| Material | PU (Polyurethane) |
| Length | 134 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Weight | 0.11 kg |
| Length | 1029 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Weight | 0.348 kg |
| Height | 160 mm |
| Width | 102 mm |
| Port / Connector type | DIN Connector |
| Fastening Type | 2-point attachment |
| DIN / ISO | 72591 |
| Number of circuits | 2 |
| Type | Holder, rotating beacon |
| Function | Holder, rotating beacon |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
Important compatibility info
| Material | Plastic |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Stop Light Switch |
| Weight | 0.027 kg |
| Housing Colour | black |
| Type | Stop Light Switch |
| Replaces | 23618 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.06
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023