Important compatibility info
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Important compatibility info
for centre hole diameter of | 30 mm |
Function | Suspension, propshaft |
Number of Holes | 2 |
Thickness | 51 mm |
Height | 110 mm |
Type | Suspension, propshaft |
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Important compatibility info
Replaced by | BWP1737 |
Housing material | Aluminium |
Water Pump Pulley Diameter | 70 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | FCA7918 |
Important compatibility info
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower, Front |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7296 |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK8150)
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Front Axle, Right |
Thread Type | Internal Thread |
Function | Angled Ball Joint, steering push rod |
Type | Angled Ball Joint, steering push rod |
Important compatibility info
Impeller Diameter | 62 mm |
Number of Ribs | 6 |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Water Pump Pulley Diameter | 95 mm |
Important compatibility info
for centre hole diameter of | 30 mm |
Function | Suspension, propshaft |
Number of Holes | 2 |
Thickness | 52 mm |
Height | 105 mm |
Length | 180 mm |
Type | Suspension, propshaft |
Placement on Vehicle | Front |
Important compatibility info
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 2 |
Inner diameter 1 | 30 mm |
Outer diameter 1 | 122 mm |
Width 1 | 70 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6219 |
Placement on Vehicle | Front Axle, Lower |
Additional Information
- 1x Borg & Beck Mounting, control/trailing arm (BSK6131)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6132)
Important compatibility info
for centre hole diameter of | 30 mm |
Function | Suspension, propshaft |
Number of Holes | 2 |
Thickness | 45 mm |
Height | 126 mm |
Length | 180 mm |
Type | Suspension, propshaft |
Placement on Vehicle | Rear |
Important compatibility info
Function | Brake Disc |
Type | Brake Disc |
Minimum thickness | 30 mm |
Centering Diameter | 90 mm |
Number of Holes | 12 |
Brake Disc Type | Vented |
Brake Disc Thickness | 34 mm |
Outer diameter | 335 mm |
Height | 93.1 mm |
Important compatibility info
Placement on Vehicle | Rear Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7679 |
Important compatibility info
Length | 864 mm |
Thread Measurement 1 | M28X1.5 RHT |
Thread Measurement 2 | M18X1.5 |
Rod/Strut | Push Rod |
Pipe Diameter | 38 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Important compatibility info
Inner diameter 1 | 49 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Material | PE (Polyethylene) |
Colour | Black |
Inner diameter 2 | 49 mm |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1002S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1106S)
Important compatibility info
Function | Drive Shaft |
Number of Teeth, ABS ring | 44 |
Length | 748 mm |
External Teeth, Wheel Side | 23 |
External Teeth, Diff.Side | 23 |
Placement on Vehicle | Front Axle Right |
Type | Drive Shaft |
Important compatibility info
Number of Parts | 2 -part |
Hub Profile | 26.1 x 23 |
Outer diameter | 250 mm |
Function | Clutch Kit |
Number of Teeth | 23 |
Type | Clutch Kit |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 282 mm |
Rotor Style | Solid |
Brake Disc Thickness | 18 mm |
Height | 56.3 mm |
Minimum thickness | 15 mm |
Centering Diameter | 68 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023