Important compatibility info
Weight | 0.105 kg |
Function | Gasket Set, oil sump |
Seal Material | Cork |
Type | Gasket Set, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Function | Tie Rod End |
Weight | 0.35 kg |
Additional Information | with lock nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Internal Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal, Aluminium |
Outer diameter | 35 mm. 24 mm |
Thickness | 66 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Rear Axle Upper, inner |
Weight | 0.087 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Material | Steel |
Length | 119 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.31 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 16.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Weight | 0.070 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Right |
Length | 285 mm |
Paired article numbers | 28671 |
Rod/Strut | Coupling Rod |
Thread Length | 26 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,75 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Placement on Vehicle | Wheel Side, Rear Axle |
Length | 77 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36553)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | frontal sided |
Width | 8 mm |
Function | Shaft Seal, crankshaft |
Inner diameter | 55 mm |
Outer diameter | 68 mm |
Weight | 0.02 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 65 mm |
Paired article numbers | 21815 |
Rod/Strut | Coupling Rod |
Material | Steel |
Placement on Vehicle | Front Axle Left |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.28 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Colour | Black |
Inner diameter | 52 mm |
Outer diameter | 40 mm |
Weight | 0.067 kg |
Extra Description | febi Plus |
Type | Cap, fuel tank |
Additional Information 2 | with support strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.405 kg |
Placement on Vehicle | Front Axle Left |
Length | 120 mm |
Paired article numbers | 06966 |
Function | Tie Rod End |
Additional Information | with lock nut |
Type | Tie Rod End |
External Thread Size | M14 x 1,5, M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Placement on Vehicle | Front Axle, Wheel Side |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 76 mm |
Inner diameter 1 | 20 mm |
Material | Rubber |
Length | 84 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03384)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Spacer Sleeve (03385)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.247 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Outer diameter | 60 mm. 23 mm |
Thickness | 54 mm |
Inner diameter | 14 mm |
Width | 60 mm |
Length | 60 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.073 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Thickness | 112 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 230 mm |
Material | Metal |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 0.294 kg |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1528 mm. 820 mm |
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Weight | 0.36 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Front Axle Right |
Width | 25 mm |
Material | Rubber/Metal |
Outer diameter | 37 mm. 40 mm |
Thickness | 60 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Weight | 0.17 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Weight | 0.055 kg |
Length | 811 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Outer diameter | 40.2 mm |
Type | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Upper, Rear Axle Right |
Length | 133 mm |
Material | Rubber/Metal |
Weight | 0.346 kg |
Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Type | Mounting, support frame/subframe |
Placement on Vehicle | both sides, Lower, Front |
Length | 98 mm |
Outer diameter 1 | 13 mm |
Outer diameter 2 | 52.5 mm |
Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023