Important compatibility info
Type | Bellow Kit, drive shaft |
Inner diameter 2 | 84 mm |
Inner diameter 1 | 22 mm |
Length | 83 mm |
Material | Rubber |
Weight | 0.42 kg |
Additional Information | with grease |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03282)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45644)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.106 kg |
for OE number | 126 460 06 04 |
Function | Lock Cylinder, ignition lock |
Type | Lock Cylinder, ignition lock |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 277 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.450 kg |
Function | Inner Tie Rod |
Internal Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 156 mm |
Height | 19 mm |
Width | 153 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 216 mm |
Function | Inner Tie Rod |
Weight | 0.572 kg |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M16 x 1,5 |
Additional Information | with counter nut |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Engine Management | Timing Chain |
Weight | 0.065 kg |
Placement on Vehicle | Front |
Function | Guide, timing chain |
Type | Guide, timing chain |
Material | Plastic |
Friction Lining Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.586 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 90 mm |
Material | Rubber/Metal |
Outer diameter | 57 mm |
Inner diameter | 12 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Material | Steel |
Outer diameter | 170 mm. 130 mm |
Thickness | 9 mm |
Inner diameter | 126 mm |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour Coding | Orange |
Placement on Vehicle | Front Axle |
Length | 60 mm |
Width | 62 mm |
Material | Rubber/Metal |
Thickness | 65 mm |
Inner diameter | 30 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Weight | 0.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Rubber Buffer, suspension |
Weight | 0.079 kg |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 130 mm |
Width | 55 mm |
Material | PU (Polyurethane) |
Brake Type | Drum Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Weight | 0.5 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 177 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Internal Thread Size | M16 x 1,5 |
External Thread Size | M16 x 1,5 |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 30 mm |
Pipe Diameter | 9 mm |
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Right |
Length | 292 mm |
Paired article numbers | 40955 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Jet, piston underside cooling |
Type | Oil Jet, piston underside cooling |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 138 mm |
Function | Sensor Ring, ABS |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 170 mm |
Thickness | 13.3 mm |
Weight | 0.16 kg |
Number of Teeth, ABS ring | 100 |
Material | Steel |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 107 mm |
Outer diameter | 35 mm |
Spanner Size | 18 |
Thread Length | 41 mm |
Weight | 0.1 kg |
Type | Camber Correction Screw |
Function | Camber Correction Screw |
Screw length below head | 97 mm |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Washer (177872)
- 1x Febi Camber Correction Screw (188574)
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 46.5 mm |
Function | Mounting, control/trailing arm |
Inner diameter | 12 mm |
Length | 41.5 mm. 54 mm |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 0.26 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 113 mm |
Filter type | Pre-Filter, with sight glass |
Number of Connectors / Ports | 2 |
Function | Fuel filter |
Weight | 0.165 kg |
Internal Thread Size | M14 x 1,5 |
Additional Information 2 | with banjo bolt, with fastening clamp |
Type | Fuel filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 09603 |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Right |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Weight | 0.42 kg |
Piston Diameter | 19.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 30 mm |
Material | Steel |
Outer diameter | 9 mm |
Inner diameter | 10.4 mm |
Spanner Size | 19 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 114 mm |
Weight | 0.24 kg |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Extra Description | ProKit |
External Thread Size | M12 x 1,75 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 55 mm |
Width | 60 mm |
Material | PU (Polyurethane) |
Outer diameter | 60 mm |
Thickness | 56 mm |
Inner diameter | 39 mm |
Weight | 0.068 kg |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.105 kg |
Length | 46 mm. 65 mm |
Material | Rubber/Metal |
Outer diameter | 56 mm |
Inner diameter | 14 mm |
Placement on Vehicle | Rear Axle, Front |
Function | Mounting, control/trailing arm |
Steering arm type | for trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Upper |
Material | PU (Polyurethane) |
Outer diameter | 135 mm |
Thickness | 74 mm |
Colour | Yellow |
Function | Rubber Buffer, suspension |
Weight | 0.13 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.585 kg |
Placement on Vehicle | Right Front |
Paired article numbers | 08050 |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.313 kg |
Placement on Vehicle | Lower Front Axle, both sides |
Function | Repair Kit, guide strut |
Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04192)
- 1x Febi Screw (04225)
- 1x Febi Nut (05161)
- 2x Febi Washer (04191)
Important compatibility info
Weight | 0.059 kg |
Length | 216 mm |
Height | 25 mm |
Width | 214 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.590 kg |
Additional Information | with counter nut |
External Thread Size | M14 x 1,5, M22 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 322 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.675 kg |
Cone Size | 23.5 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
External Thread Size | M20 x 1,5 |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.129 kg |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 45.1 mm |
Thickness | 50 mm |
Inner diameter | 12.2 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.114 kg |
Length | 1113 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 76.3 mm |
Height | 118 mm |
Type | Oil Filter, transmission (E-Axle) |
Gasket inner diameter | 63 mm |
Internal Thread Size | 3/4" - 16 UNF |
Extra Description | febi Plus |
Weight | 0.36 kg |
Function | Oil Filter, transmission (E-Axle) |
Gasket outer diameter | 72 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023