Important compatibility info
Weight | 0.225 kg |
Placement on Vehicle | Wheel Side, Front Axle |
Length | 93 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 89 mm |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (173247)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 30 mm |
Outer diameter | 166 mm |
Weight | 0.125 kg |
Outer diameter 1 | 150 mm |
Type | Protection Lid, wheel hub |
Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 47.5 mm |
Outer diameter | 69 mm |
Placement on Vehicle | both sides |
Material | Rubber/Metal |
Function | Mounting, engine |
Weight | 0.36 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Filter type | Spin-on Filter, with water separator |
Type | Fuel filter |
Internal Thread Size | 3/4" - 16 UNF |
Weight | 0.375 kg |
Height | 165 mm |
Outer diameter | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 90 mm |
Outer diameter | 88 mm |
Spanner Size | 27 |
Tightening Torque | 25 Nm |
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Extra Description | febi Plus |
Weight | 0.106 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Material | Steel |
Function | Gasket, exhaust manifold |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 231 mm |
Height | 73 mm |
Width | 231 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Weight | 0.247 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cap, fuel tank |
Material | Plastic |
External Thread Size | M64 |
Weight | 0.13 kg |
Type | Cap, fuel tank |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.220 kg |
Length | 255 mm |
Height | 29.5 mm |
Width | 82.5 mm |
Filter type | Activated Carbon Filter |
Type | Filter Set, cabin air |
Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.215 kg |
Hose Length | 370 mm |
Placement on Vehicle | Upper Left |
Inner diameter | 29 mm |
Function | Radiator Hose |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 197 mm |
Outer diameter | 88 mm |
Filter type | In-Line Filter |
Function | Fuel filter |
Type | Fuel filter |
Pipe Diameter | 10 mm |
Weight | 0.390 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, parking brake |
Placement on Vehicle | Left Rear, Right Rear |
Weight | 0.031 kg |
Length | 1460 mm |
Replaces | 16931 |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.659 kg |
Function | Inner Tie Rod |
Length | 330 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Additional Information | with counter nut |
Type | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 104.8 mm |
Notches / Holes Number | 3 |
Function | Intake Valve |
Type | Intake Valve |
Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 297 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Thread Length | 24.5 mm |
DIN / ISO | 985 |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.204 kg |
Cooling Hose | from engine to water pipe |
Function | Radiator Hose |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide) |
Weight | 0.79 kg |
Outer diameter | 17 mm |
Inner diameter | 10 mm |
Function | Hose, crankcase ventilation |
Placement on Vehicle | Lower |
Extra Description | febi Plus |
Type | Hose, crankcase ventilation |
Hose Length | 265 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.220 kg |
Filter type | Filter Insert |
Function | Oil Filter |
Type | Oil Filter |
Height | 283 mm |
Outer diameter | 90 mm |
Additional Information 2 | with seal ring |
Inner diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Weight | 0.073 kg |
Inner diameter 1 | 16 mm |
Inner diameter 2 | 52 mm |
Material | Thermoplast |
Length | 205 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Material | PU (Polyurethane) |
Width | 62 mm |
Length | 92 mm |
Placement on Vehicle | Front Axle |
Weight | 0.064 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Air Filter |
Function | Air Filter |
Weight | 0.27 kg |
Length | 243 mm |
Height | 60 mm |
Width | 227 mm |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.186 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 70 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 86.35 mm |
Width | 60 mm |
Weight | 0.105 kg |
Material | Plastic |
Colour | Black |
Function | Lift Point Pad, jack |
Shape/Form | rectangular |
Height | 47.5 mm |
Extra Description | febi Plus |
Type | Lift Point Pad, jack |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Piston Diameter | 17 mm |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Paired article numbers | 23734 |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Pipe Diameter | 9 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 89 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Weight | 138.0 kg |
Length | 435 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 110 mm |
Thickness | 27 mm |
Inner diameter | 71 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.644 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Cone Size | 16 mm |
Mounting points diameter | 10.2 mm. 9.3 mm |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Additional Information | with lock nut |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.085 kg |
Type | Holder, air filter housing |
Function | Holder, air filter housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | Elastic |
Weight | 0.055 kg |
Length | 811 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023