Important compatibility info
Placement on Vehicle | Front Axle Right, Front Axle Left |
Length | 208 mm |
Additional Information | with counter nut |
Outer diameter | 40 mm |
Spanner Size | 38 |
Weight | 0.474 kg |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 229 mm. 235 mm |
Height | 16 mm |
Width | 87 mm. 92 mm |
Filter type | Pollen Filter |
Function | Filter Set, cabin air |
Type | Filter Set, cabin air |
Weight | 0.120 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 86.3 mm |
Outer diameter | 106.4 mm |
Weight | 0.155 kg |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Type | Cover, fuel filter |
Function | Cover, fuel filter |
Gasket outer diameter | 108 mm |
Gasket inner diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Weight | 0.825 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Inner diameter | 34 mm |
Length | 154 mm |
Thickness | 77 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.360 kg |
Height | 140 mm |
Outer diameter | 175 mm |
Inner diameter | 96 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 181 mm |
Material | Steel |
Paired article numbers | 34756 |
Colour | Black |
Surface | Painted |
Weight | 0.55 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M10 x 1,25 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.153 kg |
Length | 99 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48808)
- 1x Febi Clamping Clip (12852)
- 1x Febi Clamping Clip (45641)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.4 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 21582 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 20 mm. 25 mm |
Inner diameter | 19 mm. 14 mm |
Function | Radiator Hose |
Weight | 0.163 kg |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, Upper |
Material | PU (Polyurethane) |
Outer diameter | 135 mm |
Thickness | 74 mm |
Colour | Yellow |
Function | Rubber Buffer, suspension |
Weight | 0.13 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.203 kg |
Function | Mounting, stabiliser bar |
Inner diameter | 39 mm |
Thickness | 62 mm |
Outer diameter | 63 mm |
Material | Rubber/Metal |
Width | 67 mm |
Length | 53 mm |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 208 mm |
Material | Steel |
Rod/Strut | Coupling Rod |
Weight | 0.270 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.338 kg |
Placement on Vehicle | Front, Upper, both sides |
Material | Rubber/Metal |
Outer diameter | 59 mm |
Inner diameter | 16.5 mm |
Function | Bush, driver cab suspension |
Type | Bush, driver cab suspension |
Thickness | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5, M12 x 1,5 |
Additional Information | with lock nut |
Function | Angled Ball Joint, steering push rod |
Thread Type | with right-hand thread |
Paired article numbers | 10111 |
Weight | 0.312 kg |
Type | Angled Ball Joint, steering push rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.164 kg |
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Length | 105 mm |
Material | Thermoplast |
Inner diameter 2 | 82 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100640)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Clamping Clip (100869)
Important compatibility info
Weight | 0.55 kg |
Placement on Vehicle | Front Axle Left |
Length | 181 mm |
Material | Steel |
Paired article numbers | 34755 |
Colour | Black |
Surface | Painted |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 62 mm |
Function | Bellow Kit, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 210 mm |
Material | Thermoplast |
Inner diameter 1 | 16 mm |
Weight | 0.200 kg |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (40058)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Length | 105 mm |
Material | Steel |
Paired article numbers | 15411 |
Rod/Strut | Coupling Rod |
Weight | 0.100 kg |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 224 mm |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Weight | 0.45 kg |
Type | Inner Tie Rod |
for OE number | 16 108 176 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.012 kg |
Function | Gasket Set, hydraulic pump |
Extra Description | febi Plus |
Type | Gasket Set, hydraulic pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023