Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.02 kg |
| Length | 24 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| for OE number | 1920.7N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 10 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 48 mm |
| Inner diameter | 35 mm |
| Function | Shaft Seal, crankshaft |
| Weight | 0.01 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.209 kg |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.214 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.335 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 70 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Length | 112 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17124)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (05336)
- 1x Febi Molybdenum Grease (08414)
£12.08
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing, with fastening material |
| Weight | 0.235 kg |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (21090)
- 1x Febi Seal, suspension strut support mount (12701)
£12.08
Important compatibility info
| Length | 55 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Outer diameter | 60.5 mm |
| Thickness | 60 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Weight | 0.13 kg |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.107 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1263 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.014 kg |
| Placement on Vehicle | transmission sided |
| Outer diameter | 110 mm |
| Thickness | 7 mm |
| Inner diameter | 90 mm |
| Material | FPM (fluoride rubber) |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.384 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 308 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Surface | Zinc-coated |
| Thread Length | 23 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thickness | 62 mm |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Seal Diameter | 70 mm |
| Weight | 0.43 kg |
| Type | Fuel filter |
| Filter type | Spin-on Filter, with water separator |
| Height | 152 mm |
| Outer diameter | 85 mm |
| Function | Fuel filter |
| Internal Thread Size | M10 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.02 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| for OE number | 030 103 483 K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Height | 13 mm |
| Outer diameter | 180 mm |
| Weight | 0.310 kg |
| Type | Protection Lid, wheel hub |
| Function | Protection Lid, wheel hub |
| Bolt Hole Circle Diameter | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.300 kg |
| Placement on Vehicle | Front Axle |
| Length | 390 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Type | Filter, cabin air |
| Length | 213 mm |
| Height | 47 mm |
| Width | 193 mm |
| Filter type | Pollen Filter |
| Weight | 0.112 kg |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.243 kg |
| Type | Repair Kit, brake camshaft |
| Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Filter type | Filter Insert |
| Length | 277 mm |
| Height | 43 mm |
| Width | 198 mm |
| Weight | 0.244 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Function | Inner Tie Rod |
| Additional Information | with counter nut |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 207 mm |
| Weight | 0.42 kg |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Switch point to | 0.5 bar |
| Spanner Size | 24 |
| Switch point from | 0.2 bar |
| Function | Oil Pressure Switch |
| Number of Connectors / Ports | 1 |
| Colour | Black |
| Weight | 0.034 kg |
| External Thread Size | M12 x 1,5 |
| Type | Oil Pressure Switch |
| Length | 52 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.05 kg |
| Additional Information | with gasket/seal |
| Outer diameter | 44 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023