Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.335 kg |
| Placement on Vehicle | Front Axle, transmission sided |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 70 mm |
| Material | Rubber |
| Inner diameter 1 | 24 mm |
| Length | 112 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17124)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (05336)
- 1x Febi Molybdenum Grease (08414)
£12.08
Important compatibility info
| Weight | 0.091 kg |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 67 mm |
| Inner diameter 1 | 16 mm |
| Material | Thermoplast |
| Length | 213 mm |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Bellow, steering (22631)
- 1x Febi Clamping Clip (38756)
- 1x Febi Gasket, steering gear (22632)
£12.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 73 mm |
| Thickness | 10 mm |
| Inner diameter | 53 mm |
| Function | Shaft Seal, wheel hub |
| Weight | 0.002 kg |
| Type | Shaft Seal, wheel hub |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.214 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.047 kg |
| Thread Type | with right-hand thread |
| DIN / ISO | 71802 |
| Additional Information 2 | with nut |
| External Thread Size | M8 x 1,25 |
| Extra Description | ProKit |
| Type | Angled Ball Joint |
| Function | Angled Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Length | 55 mm |
| Width | 61 mm |
| Material | Rubber/Metal |
| Outer diameter | 60.5 mm |
| Thickness | 60 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Weight | 0.13 kg |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Colour | Blue |
| Function | Gasket, oil sump |
| Weight | 0.053 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.458 kg |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Length | 110 mm |
| Spanner Size | 15 |
| Paired article numbers | 106865 |
| Function | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.05 kg |
| Additional Information | with gasket/seal |
| Outer diameter | 44 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.107 kg |
| Function | V-Ribbed Belt |
| Number of Ribs | 5 |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1263 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Function | Seal Kit, multi-valve |
| Weight | 0.066 kg |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal, air compressor (37835)
- 1x Febi Seal, air compressor (35784)
- 1x Febi Seal, air compressor (37812)
- 1x Febi Seal Kit, multi-valve (37772)
£12.08
Important compatibility info
| Outer diameter | 34 mm. 43 mm |
| Weight | 0.097 kg |
| Placement on Vehicle | Rear Axle Lower, both sides, outer |
| Material | Rubber/Metal |
| Thickness | 30 mm |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Seal Diameter | 70 mm |
| Weight | 0.43 kg |
| Type | Fuel filter |
| Filter type | Spin-on Filter, with water separator |
| Height | 152 mm |
| Outer diameter | 85 mm |
| Function | Fuel filter |
| Internal Thread Size | M10 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Function | Cap, wheel bearing |
| Inner diameter | 54 mm |
| Weight | 0.04 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Cap, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.02 kg |
| Placement on Vehicle | frontal sided |
| Width | 7 mm |
| Outer diameter | 65 mm |
| Function | Shaft Seal, camshaft |
| Colour | Brown |
| Inner diameter | 51 mm |
| Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.056 kg |
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
| Length | 830 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 4 |
| DIN / ISO | 7867 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.234 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Metal |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Weight | 0.04 kg |
| Placement on Vehicle | transmission sided |
| Material | FPM (fluoride rubber) |
| Outer diameter | 90 mm |
| Thickness | 10 mm |
| Inner diameter | 75 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| Length | 362 mm |
| Weight | 0.14 kg |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
| Paired article numbers | 30847 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 45.5 mm |
| Inner diameter | 14 mm |
| Function | Bushing, stabiliser coupling rod |
| Length | 50 mm |
| Weight | 0.17 kg |
| Type | Bushing, stabiliser coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023