Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M20 x 1,5, M14 x 1,5 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle |
| Length | 95 mm |
| Paired article numbers | 03387 |
| Thread Type | with left-hand thread |
| Cone Size | 18 mm |
| Pipe Diameter | 24 mm |
| Function | Tie Rod End |
| Weight | 0.497 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.79
Important compatibility info
| Weight | 0.801 kg |
| Screw length below head | 82 mm |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, crankshaft (39948)
- 12x Febi Flywheel Bolt (46335)
- 1x Febi Pilot Bearing, clutch (11588)
£138.16
Important compatibility info
| Weight | 0.45 kg |
| Function | Resistor, interior blower |
| Number of Connectors / Ports | 4 |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| for OE number | 46723713 |
| Material | Plastic |
| Colour | brown, green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.23
Important compatibility info
| Weight | 5.1 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter (31431)
- 1x Febi Oil Filter (35421)
- 1x Febi Filter Kit, crankcase ventilation (172336)
- 1x Febi Seal, oil filter housing (05970)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Seal Ring, oil drain plug (35640)
- 2x Febi Seal, oil filter housing (35618)
- 2x Febi Oil Filter, manual transmission (38975)
- 1x Febi Air Dryer Cartridge, compressed-air system (35304)
- 1x Febi Filter, cabin air (22095)
- 1x Febi Oil Filter (172139)
£119.20
Important compatibility info
| Function | Rocker Arm, engine timing |
| Weight | 0.046 kg |
| Type | Rocker Arm, engine timing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.47
Important compatibility info
| Function | Screw Plug, oil sump |
| Surface | Zinc-coated |
| Bolt Head/Nut Design | Hexagon Socket |
| Length | 16 mm |
| Material | Steel |
| Screw length below head | 12 mm |
| DIN / ISO | 908 |
| Spanner Size | 8 |
| External Thread Size | M18 x 1,5 |
| Weight | 0.029 kg |
| Type | Screw Plug, oil sump |
| Additional Information 2 | without seal ring |
| Outer diameter | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.04
Important compatibility info
| Function | Sensor Ring, ABS |
| Inner diameter | 109 mm |
| Number of Teeth, ABS ring | 80 |
| Outer diameter | 138 mm |
| Thickness | 15 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle |
| Weight | 0.15 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.00
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.815 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 116 mm |
| Inner diameter | 14 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Hole Spacing | 112 mm. 87 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.01
Important compatibility info
| Placement on Vehicle | Lower |
| Material | Plastic |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Weight | 0.981 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£54.50
Important compatibility info
| Number of Connectors / Ports | 5 |
| Weight | 0.06 kg |
| for OE number | 3985226 |
| Type | Sensor, accelerator pedal position |
| Function | Sensor, accelerator pedal position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£26.99
Important compatibility info
| Weight | 0.9 kg |
| Function | Mounting, stabiliser bar |
| Inner diameter | 17 mm |
| Thickness | 56 mm |
| Outer diameter | 31 mm |
| Material | Rubber with fabric lining |
| Width | 51 mm |
| Length | 56 mm |
| Placement on Vehicle | Front Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£13.26
Important compatibility info
| Weight | 0.17 kg |
| Placement on Vehicle | both sides |
| Length | 443 mm |
| Housing Diameter | 15 mm |
| Eject Force | 380 N |
| Stroke | 150 mm |
| Mounting points diameter | 8 mm |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 265.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.42
Important compatibility info
| Weight | 0.12 kg |
| Length | 280 mm |
| Height | 33 mm |
| Width | 242 mm |
| Filter type | Pollen Filter |
| Driver Position | for right-hand drive vehicles |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.79
Important compatibility info
| Placement on Vehicle | Front Axle Right, Rear Axle Left |
| Length | 232 mm |
| Width | 165 mm |
| Material | Rubber/Metal |
| Weight | 11.05 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£104.71
Important compatibility info
| Placement on Vehicle | Rear, Centre |
| Weight | 0.500 kg |
| Length | 1152 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.31
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.289 kg |
| Number of Connectors / Ports | 2 |
| Cooling Hose | from engine to thermostat |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Additional Information 2 | with flange, with sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.38
Important compatibility info
| Weight | 0.840 kg |
| Function | Bushing, leaf spring |
| Material | Rubber/Metal |
| Length | 75 mm |
| Inner diameter | 6.5 mm |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.75
Important compatibility info
| Function | Chain, oil pump drive |
| Number of Chain Links | 52 |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.152 kg |
| Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.42
Important compatibility info
| Weight | 0.670 kg |
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.37
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Weight | 3.6 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 265 mm |
| Thickness | 39 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.20
Important compatibility info
| Function | EGR Valve |
| Weight | 0.68 kg |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£79.98
Important compatibility info
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 4.95 kg |
| Type | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£147.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Weight | 0.589 kg |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.33
Important compatibility info
| Weight | 0.040 kg |
| Height | 76 mm |
| Outer diameter | 65 mm |
| Inner diameter | 22 mm |
| Filter type | Filter Insert |
| Seal Diameter | 74.5 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.05
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 2.300 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 1607468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.77
Important compatibility info
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
| Material | Rubber |
| Weight | 0.039 kg |
| Width | 157 mm |
| Placement on Vehicle | Front Axle, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.45
Important compatibility info
| Additional Information | without coolant level sensor |
| Weight | 0.51 kg |
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 241 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.61
Important compatibility info
| Weight | 0.990 kg |
| Placement on Vehicle | Front Axle |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Type | Brake Pad Set, disc brake |
| Width | 45.5 mm |
| Length | 108.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.97
Important compatibility info
| Type | Tensioner Pulley, V-ribbed belt |
| Function | Tensioner Pulley, V-ribbed belt |
| Mounting points diameter | 10 mm |
| Outer diameter | 75 mm |
| Material | Metal |
| Weight | 0.903 kg |
| Width | 32 mm |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.93
Important compatibility info
| Placement on Vehicle | Front Axle, Wheel Side |
| Material | Thermoplast |
| Function | Bellow Kit, drive shaft |
| Weight | 0.57 kg |
| Type | Bellow Kit, drive shaft |
| Length | 146 mm |
| Height | 146 mm |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 97 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (31834)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
- 1x Febi Axle Bolt, drive shaft (22462)
£16.61
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023