Important compatibility info
Opening Temperature | 88 °C |
Function | Thermostat, coolant |
Weight | 0.05 kg |
Additional Information | with gasket/seal |
Outer diameter | 44 mm |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.056 kg |
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Length | 830 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 4 |
DIN / ISO | 7867 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.335 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 70 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Length | 112 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17124)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (05336)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Width | 118 mm |
Outer diameter | 59 mm |
Thickness | 51 mm |
Inner diameter | 21 mm. 9 mm |
Paired article numbers | 19457 |
Function | Mounting, control/trailing arm |
Weight | 0.460 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.214 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.196 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 150 mm |
Material | Rubber |
Inner diameter 1 | 10 mm |
Inner diameter 2 | 40 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bellow, steering (21169)
- 4x Febi Cable Tie (07026)
Important compatibility info
Function | Cap, wheel bearing |
Inner diameter | 54 mm |
Weight | 0.04 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Cap, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09225)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
Important compatibility info
Weight | 0.243 kg |
Type | Repair Kit, brake camshaft |
Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.21 kg |
Placement on Vehicle | Front Axle, transmission sided |
Length | 102 mm |
Material | Rubber |
Inner diameter 2 | 76 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01047)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.504 kg |
External Thread Size | M14 x 1,5 |
Length | 215 mm |
Width | 74 mm |
Function | Spring Clamp |
Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 79 mm |
Material | Rubber |
Inner diameter 1 | 21 mm |
Inner diameter 2 | 79 mm |
Function | Bellow Kit, drive shaft |
Weight | 0.34 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (03183)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Nut, kingpin (02160)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.450 kg |
Width | 236 mm |
Height | 59 mm |
Type | Air Filter |
Function | Air Filter |
Additional Information 2 | with pre-filter |
Length | 239 mm |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.014 kg |
Placement on Vehicle | transmission sided |
Outer diameter | 110 mm |
Thickness | 7 mm |
Inner diameter | 90 mm |
Material | FPM (fluoride rubber) |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
Additional Information | with counter nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 207 mm |
Weight | 0.42 kg |
External Thread Size | M14 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, intake air temperature |
Weight | 0.01 kg |
Type | Sensor, intake air temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.209 kg |
Placement on Vehicle | Rear Axle |
Function | Suspension Strut Support Mount |
Material | Rubber/Metal |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Height | 12 mm. 16 mm |
Outer diameter | 125 mm |
Inner diameter | 105 mm |
Function | Shaft Seal, manual transmission |
Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 24 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
for OE number | 1920.7N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear, Left Rear |
Length | 1493 mm |
Function | Cable Pull, parking brake |
Weight | 0.30 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023